See more Roof sealants
NJL Black Bitumen Paint Concrete, Steel Iron, Weatherproof Waterproof Coating 25L
Sold & shipped by NJL DIRECT LIMITED
Available online only and not stocked in B&Q stores
£
71.99
Checking availability...
Product details
Product information
Njl Direct 5 Litre Black Bitumen Paint is a solvent based,full bodied Njl Direct black bitumen paint, When dry, the product forms an odourless and taint free bitumen film suitable for the protection of metals, concrete, fibre cement, corrugated iron, asphalt
- Guarantee of Statutory
- NJL Black Bitumen Paint contains a flammable solvent, and all normal precautions against fire must be taken during both storage and use. Store in original container in cool (5°C - 25°C) dry conditions. Keep away from sources of ignition.
- METHOD OF USE Preparation Mix Contents thoroughly, before use. Apply by brush. As with all surface coatings, preparation of the surface is of great importance and will influence the degree of adhesion obtained and the life of the coating. All surfaces must be sound, stable and thoroughly clean. BITUMEN PAINT may be applied to slightly damp but not wet surfaces. Metal surfaces should be wire brushed to remove rust. Where long term protection is required, an initial treatment of a rust inhibitive product such as red lead or zinc phosphate should be used. A minimum of two coats should be applied, the first being allowed to dry before the second is applied. NOTE: BITUMEN PAINT may bleed through any paints subsequently applied over it. Apply a primer recommended by the paint manufacturer before painting over it. NJL Bitumen Paint coating on concrete, etc: since concrete and some stone surfaces may be porous, an initial primer coat of NJL Bitumen Primer should be applied.
- BITUMEN PAINT is solvent based and can give off an inflammable vapour. The solvent may have a narcotic effect if inhaled or absorbed through the skin. The following precautions are therefore advised when using it. * Wear protective clothing * Avoid smoking, hot lights, naked flames or creating sparks. * Never take the products internally. * Avoid contact with the skin, eyes and non protective clothing . (Any product which has dried on the skin may be removed with a proprietary hand cleaner). * When working with the product, until it has dried, ensure that the area is well- ventilated thereby avoiding build-up of solvent vapour.
Features and benefits
- Fast Drying Solvent Based
- Forms an Odourless and Taint Free Bitumen Film
- Suitable for The Protection of Metal
- For the Protection of Fibre Cement,Corrugated Iron Asphalt Wood Against Water Attack.
- Apply by Brush,Roller or with a Suitable Spray Gun.
- For use on most common building surfaces.
Legal Information
- Label Info 1: Signal Word DANGER Label Info 2: Hazard Statements H372 Causes damage to organs through prolonged or repeated exposure.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects.H226 - Flammable liquid and vapour EUH 066 Repeated exposure may cause skin dryness or cracking. Label Info 3: Precautionary Statements P102 Keep out of reach of children.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P260 Do not breathe dust/fume/gas/mist/vapours/ spray.P271 Use only outdoors or in a well-ventilated area.P273 Avoid release to the environment.P280 Wear protective gloves/protective clothing/eye protection/face protection.P302 + P352 IF ON SKIN: Wash with plenty of water/…P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P314 Get medical advice/attention if you feel unwell.P403 + P233 Store in a well-ventilated place. Keep container tightly closed.P501 Dispose of contents/container in accordance to local regulations.
Specifications
| Brand | NJL |
|---|---|
| Active substances | White Spirit |
| Application method | Brush, roller or spray |
| Base | Solvent-based |
| Colour group | Black |
| Container type | Tub |
| Coverage | 200m² |
| Coverage per litre | 10m²/L |
| Drying time | 4-6 h |
| Number of coats | 2 |
| Paint base density | Light base |
| Product weight | 24000g |
| Recoat time | 24 hours |
| Surface preparation | Apply by brush. As with all surface coatings, preparation of the surface is of great importance and will influence the degree of adhesion obtained and the life of the coating. All surfaces must be sound, stable and thoroughly clean. BITUMEN PAINT may be applied to slightly damp but not wet surfaces. Metal surfaces should be wire brushed to remove rust. Where long term protection is required, an initial treatment of a rust inhibitive product such as red lead or zinc phosphate should be used. A minimum of two coats should be applied, the first being allowed to dry before the second is applied. NOTE: BITUMEN PAINT may bleed through any paints subsequently applied over it. Apply a primer recommended by the paint manufacturer before painting over it. |
| Texture | Smooth |
| VOC details | 349g/L |
| VOC level | High |
| Volume | 25000L |
| Product code | 5060502360427 |
