NJL Black Bitumen Paint Concrete, Steel Iron, Weatherproof Waterproof Coating 5L

• Guarantee - Statutory
• NJL Black Bitumen Paint contains a flammable solvent, and all normal precautions against fire must be taken during both storage and use. Store in original container in cool (5°C - 25°C) dry conditions. Keep away from sources of ignition.
• METHOD OF USE Preparation Mix Contents thoroughly, before use. Apply by brush. As with all surface coatings, preparation of the surface is of great importance and will influence the degree of adhesion obtained and the life of the coating. All surfaces must be sound, stable and thoroughly clean. BITUMEN PAINT may be applied to slightly damp but not wet surfaces. Metal surfaces should be wire brushed to remove rust. Where long term protection is required, an initial treatment of a rust inhibitive product such as red lead or zinc phosphate should be used. A minimum of two coats should be applied, the first being allowed to dry before the second is applied. NOTE: BITUMEN PAINT may bleed through any paints subsequently applied over it. Apply a primer recommended by the paint manufacturer before painting over it. NJL Bitumen Paint coating on concrete, etc: since concrete and some stone surfaces may be porous, an initial primer coat of NJL Bitumen Primer should be applied.
• BITUMEN PAINT is solvent based and can give off an inflammable vapour. The solvent may have a narcotic effect if inhaled or absorbed through the skin. The following precautions are therefore advised when using it. * Wear protective clothing * Avoid smoking, hot lights, naked flames or creating sparks. * Never take the products internally. * Avoid contact with the skin, eyes and non protective clothing . (Any product which has dried on the skin may be removed with a proprietary hand cleaner). * When working with the product, until it has dried, ensure that the area is well- ventilated thereby avoiding build-up of solvent vapour.

Features and benefits

NJL BITUMEN PAINT provides an effective waterproof, weatherproof, corrosion resistant protective coating.

It is resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation. It is

suitable for application to a wide variety of materials including iron and steel, lead, zinc, aluminium,

asbestos-cement, concrete, stone and brick and is mainly used for:

* Metal production - corrugated iron sheds, fire escapes, stairways, ladders, storage tanks, gutters,

down-pipes, fences, railings, gates etc.

* Protecting drinking water tanks.

* A protective coating for concrete structures, stone, brick, concrete screeds and sand/ cement

surfaces.

• Fast Drying Solvent Based
• Forms an Odourless and Taint Free Bitumen Film
• Suitable for The Protection of Metal
• For the Protection of Fibre Cement,Corrugated Iron Asphalt Wood Against Water Attack.
• Apply by Brush,Roller or with a Suitable Spray Gun.
• For use on most common building surfaces.