See more Roof sealants
NJL Brushacryl One Coat Leaksealer Waterproof Roof Coating Fibre Reinforced Grey 1KG
Sold & shipped by NJL DIRECT LIMITED
Available online only and not stocked in B&Q stores
Product details
Product information
BRUSHACRYL ONE COAT is a resin based, fibre re-enforced roof repair compound which is effective on all common roofing surfaces and types, giving an instant roof repair even in the wet and on wet surfaces.
- Guarantee - Statutory
Features and benefits
BRUSHACRYL is brush applied and dries to a smooth seamless flexible membrane. Because of the high level of fibre reinforcement, BRUSHACRYL will bridge small cracks and requires only a one-coat brush application to give instant and total water protection, even in areas subject to ponding. BRUSHACRYL requires no primer on sound nonporous surfaces. USES General sealing, maintenance, repair and waterproofing of most common roofs in wet or dry conditions– for use on concrete, fibre/cement, roofing felt,mastic asphalt, existing bituminous roof coatings, rigid uPVC corrugated iron, metals, slates, brickwork, tiles, lead, copper and zinc. Waterproofing guttering (plastic and metal), downpipes, gullies, flashings, upstands, vents and leadwork.
- Fibre re-enforced roof repair
- One coat brush applied
- Instantly waterproof when applied
- Will bridge small cracks
- No need to wait for the rain to stop
- Instant roof repair even in the wet and on wet surfaces
Legal Information
- IMPORTANT Important Contains a flammable solvent and all normal precautions against fire must be taken during both use and storage. Keep away from sources of ignition.
Specifications
| Brand | NJL |
|---|---|
| Active substances | White Spirit |
| Application method | Brush |
| Base | Solvent-based |
| Colour group | Grey |
| Container type | Tin |
| Coverage | 2m² |
| Coverage per litre | 2m²/L |
| Curing time | 48h |
| Drying time | 24 h |
| Number of coats | 1 |
| Paint base density | Medium base |
| Product weight | 1000g |
| Surface preparation | PREPARATION Before using a surface coating the roof structure should be inspected and, if necessary, put in order, replaced or refixed and cracks in felt or asphalt filled. (Safety Recommendation: do not coat roof lights, windows, glass or translucent sheets. These will constitute a hidden hazard if disguised). All roof surfaces to be coated should be stable, clean, and free from loose debris, dirt, dust and grease. All traces of algae and fungi growth should be removed using a stiff-bristled brush. Make good any holes or loose felt/slates/tiles etc. Blisters in roofing felt must be cut, dried, re-bonded and sealed. New metal surfaces must be degreased with a suitable solvent. Remove all rust or treat rusty surfaces with a rust inhibitive primer (e.g. zinc phosphate based). For porous or friable surfaces, a vinyl acetate-based primer is recommended prior to overlaying with the product. Priming mastic asphalt is not necessary but is recommended for extended longevity. It is recommended to test a small patch of the intended coating area to test compatibility before use. |
| Texture | Smooth |
| VOC details | 483g/L |
| VOC level | High |
| Volume | 1L |
| Product code | 5060502360526 |
