Nx Rapid Set No Floor & Wall Adhesive
[This is a block of tabs..]
This floor and wall adhesive is water resistant and suitable for ceramic and porcelain wall and floor tiles
- For use on - Cement screed, concrete, vinyl tiles, plasterboard
Features and Benefits
- Suitable for ceramics and porcelain
- High bond strength
- 4kg/ m²
|Location||Internal & external|
|Ready to grout||3hours|
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Help & Advice
- 00 Total area to cover in m2
- 00 No of tiles required
The number of tiles includes a 10% wastage allowance and is only given as an estimate
How to guides
When you've fixed all your tiles to the wall, you should leave them for the adhesive to dry. How long this takes depends on the adhesive you use, so it's best to check the manufacturer's instructions. Then you can finish off all the joints with grout (special hard filler). To finish off your tiling, you might also need to add a waterproof seal along the bottom of a splashback, and possibly mount some fixtures too.
There are lots of good general-purpose adhesives on the market, but for some materials you need something that's specially designed. Our guide will help you decide what is best for the job.
Choose a convenient delivery date on 1000s of products
45 day returns policy
Arrange collection or return to store.Customer support team - 0333 014 3357
Free delivery on standard orders over £50 placed on diy.com
Excludes Large and Bulk delivery
This 2.5kg wall & floor grout is use with underfloor heating & timber floors on for ceramic tiles, concrete, natural stone, plaster, plasterboard, porcelain & timber. Simply apply and leave for 24 hours to dry. Each pack covers up to 8 m² on average. Guarantee - 1 year Resistance - ...
Give a smart and elegant finish to your tiles with this smooth aluminium t shaped dividing tile profile. Suitable for use with tiles up to 10mm thick, to hide and protect the exposed raw edges of tiles. Adhesive required Fitting instructions - Install with tile adhesive when tilling Recommended for ...
A mirror adhesive from Evo-Stik, ideal for bonding mirror walls in shops, restaurants & gymnasiums. Suitable for bonding bonding mirrors to sound plaster, concrete, wood, doors, ceramic wall tiles, walls & ceilings Solvent free Suitable for bonding mirrors to sloping walls & ceilings Permanently elastic