Polycell Trade All Purpose Powder Filler 5kg
[This is a block of tabs..]
- Suitable for filling and repairing joints, cracks and holes
- Can be used on most building materials
- Apply with a filling knife or spreader
- No shrinking or cracking
Features and Benefits
A powder filler with excellent mixability, lump free and with good adhesion, for use both inside and outside.
- Smooth, easy to sand formulation
- Long working time
- Accepts nails and screws
|Location||Internal & external|
|Application||Filling knife or spreader|
|Shrinkage||No shrinking or cracking|
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Help & Advice
Wall Painting Calculator
- 00 litres of paint
This is based on a coverage of 10m² per litre of paint. Always check the coverage on the side of the tin before buying.
There are lots of good general-purpose adhesives on the market, but for some materials you need something that's specially designed. Our guide will help you decide what is best for the job.
Choose a convenient delivery date on 1000s of products
45 day returns policy
Arrange collection or return to store.Customer support team - 0333 014 3357
Free delivery on standard orders over £50
Excludes Large and Bulk delivery
This 825ml expanding foam from B&Q has been specially designed for filling, fixing and insulating wood, metal, plastic and masonry. It comes in an easily storable and transportable aerosol and expands to the exact size of the cavity you need filling. If you're using it during redecoration projects, ...
A combined setting and air-drying, gypsum based material for both bulk filling and finishing of joints. High coverage rates and minimal drying shrinkage allows application in 2 coats. Apply by hand, 60 minute working time
A combined setting and air drying gypsum based material for bulk filling and finishing of joints. High coverage rate and minimal drying shrinkage allows application in only two coats. Easy to mix, apply and sand, with 20 minutes working time. The second (final) coat can be applied after 20-30 minutes. ...