PRO F Type Hex Crimp Tool & RG6 Male F Connectors Aerial Coax Crimper CT100 Sky

1x F-Type Hex Crimp Tool & 10x RG6 Male F-Connectors

Overview

- These connectors can be crimped on to an RG6 / CT100 suitable cable with the

supplied crimp tool to provide a high quality connection to F-Connector

equipment. It is very easy to do but If you would like help on how

to crimp, please do not hesitate to get in touch.Sizes on crimp tool (smallest to largest)CT/WF100 & RG6 – Coaxial cable with an outer diameter of 6-7mm (approx.) and relevant F-connectors. When closed completely, the jaw size is 8.2mm.CT/WF125 – Coaxial cable with an outer diameter of 7-8mm (approx.) and relevant F-connectors. When closed completely, the jaw size is 9.5mm.CT/WF165 & RG11 – Coaxial cable with an outer diameter of 9-10mm (approx.) and relevant F-connectors. When closed completely, the jaw size is 11.2mm.

Suitable for the following cable;

RG6, CT100/WF100 and any other similar sized coaxial cables.

If you don't know what type of coaxial cable you have, this connector will

crimp to coaxial cable with an outer diameter of 7mm approx.

How

to install:

You will need to strip the PVC outer layer without damaging the core inside, you can do this with one of our cable strippers but if you are confident with a pair of snips/pliers, you can strip the outer layer away with either of those. When using our F-Connector hex crimp plugs, cut all of the way through the cable leaving only the central core untouched. There is a rubber/plastic “O” ring inside of the connector that will go around the outer PVC layer of your cable. A metal ring inside of the connector will go under this outer layer of PVC making contact with the braid (shield) beneath. You should also ensure that you have stripped enough of the cable for the copper conductor to poke out of the top of the connector, this can be trimmed at a later stage if it is too long but around 10mm will be sufficient. This will also create a outdoor safe connector. If you have your own connectors, please follow the instructions