Add to wish list
[This is a block of tabs..]
You can apply this woodstain from the Ronseal 5 year range to smooth planed exterior wood, using a brush, to colour and provide protection against weathering. It takes 1 hour to dry and will cover up to 18 m² per litre on average.
This 5 Year Wood Stain is BBA approved to offer 5 years of protection to your exterior wood. It colours wood, without hiding the natural beauty of the grain. For best protection it requires 3 coats, but that means you won't have to do it for quite some time, it's a stain that lasts.
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Safety data sheets for B&Q products
Find out more about
Safety data sheets
This is based on a coverage of 10m² per litre of paint. Always check the coverage on the side of the tin before buying.
Walls almost always need some surface preparation before you can start painting. Even brand-new plaster needs sealing. You should fill any cracks and holes and make sure all surfaces are clean, smooth and dry. You can paint over emulsion-painted surfaces that are in good condition, but make certain you strip back or sand off any peeling paint.
If you're painting on bare wood, plaster or metal surfaces, you'll get a better result if you use a primer first. It provides a surface which the paint can bond to and stops the paint being absorbed. Find out more what you need and for what surface.
Finding the right combination of colours to match your home and personal taste is essential, but it can often feel like looking for a needle in a haystack.
Customer support team
- 0333 014 3357
Home delivery orders placed on diy.com.Excludes Next Day Bulk delivery goods