SPARES2GO Water Hammer Arrestor 3/4" Brass Washing Machine / Dishwasher Pipe Noise Stop

Features and benefits

Premium quality water hammer arrestor to stop pipe noise / bangs caused by sudden valve closures of your appliance. Perfect for use with your washing machine / dishwasher and can also be used with any other water-hosed appliance / outlet around the home. Attaches directly onto valves with its 3/4" Male - 3/4" Female compression fittings and helps to protect and relieve pipe stress and damage.

• 3/4" Water Hammer Arrestor Pipe Noise Stop / Protector
• Length: 72mm -- Height: 108mm -- Thread: UK 3/4" Female x 3/4" Male -- Installation: ‎Screw-In
• Maximum Pressure: ‎60 psi (Pound per Square Inch) -- Material: Lead Free Brass -- Compact, slim design
• Can be used within 1.5m of any appliance or water outlet -- Vertical or horizontal mounting
• Effective and continual protection from water hammer banging pipes -- Relieves pipe stress
• Can be screwed directly onto UK washing machine / dishwasher hoses
• Installation Instructions: Can be fitted vertically or horizontally. Fit the female hose thread onto your appliance shut-off valve and install supply hose onto the male thread outlet of the water hammer arrestor. Hand tighten connections and use a wrench to tighten an extra 1/4 turn. Do not over-tighten.
• Important: A pressure reducing valve should be installed before the water hammer arrestor for any systems exceeding 60psi (413.7 kPa) pressure.