See more Paint
Stonecare4U - Limestone Sealer Colour Boost (25L) - Eco Friendly, High Performance Sealer For All Forms Of Limestone
Sold & shipped by Stonecare4U Ltd
Available online only and not stocked in B&Q stores
Product details
Product information
Stonecare4U's Limestone Sealer Colour Boost is a professional-grade sealant for external natural stone. Above all, it protects against stains and soiling, for example, general dirt and grime. In addition, the colour-boost formula delicately enhances the stone’s natural colours. It is suitable for all types of natural stone including sandstone (*exceptions apply), limestone, slate, granite & others.
Average 4 – 6 sq metres per litre on textured and riven surfaces. Up to 15 sq metres per litre on smooth, honed or polished surfaces. Coverage will vary depending on surface porosity.
*Please note this product is not suitable for Kandla Grey (mid & light grey) sandstone.
- Guarantee - 6 months
Features and benefits
Remove any loose debris from the work surface before you start the job and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask & clothing.
Leave the surface for a minimum of 72 hours with clear and dry weather to ensure the surface is completely dry and ready to be sealed.
Apply the first coat of Essential Limestone Sealer Colour Boost with a low-pressure sprayer, roller, natural fibre brush or sponge. Do not dilute! In addition, any excess sealer must be removed entirely from the surface after 20 to 30 minutes.
Apply a second coat applied approximately 45 to 60 minutes later for best results.
Certainly, after application, it is important that the stone surface is kept completely dry through the curing process, which can take up to 72 hours.
Please Note: Essential Limestone Sealer Colour Boost will alter the colour/appearance of the stone surface. Therefore, we always advise trying the product in an inconspicuous area prior to use. Surfaces that are not to be sealed should be protected with masking material.
*Please note this product is not suitable for Kandla Grey (mid & light grey) sandstone.
To sum up, clean sealed areas with a mild, ph neutral cleaner or a very low concentration of our outdoor cleaner range. Do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface. Not recommend for use on non-porous surfaces.
- Stonecare4U's Limestone Sealer is a high performance sealer for stone which was designed for external and natural limestone surfaces, which is suitable for other porous natural stones including slate and sandstone.
- The special colour boost finish not only provides superb water repellence, but also works to enhance the natural hues of the stone, creating deeper and more vibrant colours which really bring your home to life.
- After application, the attractive colour boost finish can help to inhibit the growth and regrowth of moss algae and lichen spores that cause unsightly patches on your surface, as well as inhibiting effloresecence.
- Considered to be professional grade by many experts and users alike, our product was also designed to have an eco-friendly composition to make it safe for pets and children once dry!
- Average 4 – 6 sq metres per litre on textured and riven surfaces. Up to 15 sq metres per litre on smooth, honed or polished surfaces. Coverage will vary depending on surface porosity.
- *Please note this product is not suitable for Kandla Grey (mid & light grey) sandstone.
Specifications
Base | Water-based |
---|---|
Location | Interior & exterior |
Paint type | Sealer |
VOC level | No VOC level recorded |
Volume | 25000ml |
Product code | 5065006735306 |