Fortia 15 Lite Clear Glazed Traditional Pine veneer Internal Knotty pine Door, (H)1981mm (W)686mm (T)35mm
Product details
Product information
Allows light to penetrate through from one space to another which is ideal for dark hallways. The construction of this door is engineered with a unique configuration of timber that is laminated and glued together in different directions. Lipping is then fixed to the edges and a veneer is then applied to the surface.
- Fittings & fixings included
- Guarantee of 15 years
- Comes with Hinges, handle and frame sold separately
Features and benefits
- Ready to paint, stain or varnish
- Ready to paint, stain or varnish. Please refer to manufacturers care instructions included with your door
- Hinges, handle and frame sold separately
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
Colour group | Natural |
---|---|
Door construction | Engineered construction |
Door opening direction | Reversible |
Door type | Full |
Fire rated | Not fire-rated |
Glass finish | Clear |
Glass type | Toughened safety glass |
Glazed | Glazed |
Glazed panel style | 15 Lite |
Glazing thickness | 4mm |
Height (mm) | 1981mm |
Location | Internal |
Material | Knotty pine |
Model name/number | 2173 |
Number of panes | 15 |
Pack quantity | 1 |
Standard | BS6206 A. |
Thickness (mm) | 35mm |
Weight (kg) | 20kg |
Width (mm) | 686mm |
Product code | 03164747 |
Manufacturer / EU responsible person
Reviews
3 / 5(4 reviews)Waynemitchell323 - 5 / 5 - 03/10/2017
Nice doors
Quite nice doors. Good value. I bought these doors to replace internal French doors and I'm happy with the result.
M241 - 1 / 5 - 21/08/2017
Poor quality
Obviously intended to look as if its solid pine but its a bit like a patchwork quilt, made up of off cuts glued together and it appears to have been veneered. Couldn't use clear varnish as the leading edges consisted of so many short lengths of wood, which didn't match, it would have looked terrible. I would have sent it back but unfortunately I started to trim the bottom before my son pointed out all the defects. A lesson learnt
Hebbsie - 1 / 5 - 05/11/2014
A very poor quality door.
This door is of appalling quaity but cheap. If you buy one remove the carboard packing and if there is a much as a pin hole gap in the cellophane REJECT IT. I think the veneer is fixed with no better than flour water. If you paint it do not use ANY water based paint in ANY layers AT ALL, especially the primer undercoat. The veneer will blister. Seal it IMMEDIATELY. If you wait to clean off swarf edges etc first you are too late, the veneer will blister. Seal it then go back to clean it up then re-seal with several varnishes or oil based coats. then it will be a fine door.
Dino D - 5 / 5 - 29/10/2014
Great purchase! I've saved about £450
I wanted to make room dividing doors and to by a ready made kit would have cost me over £1200. I bought 4 doors and some timber and trim from B&Q and did the job for less than half this price and it looks fab