160mm Matt Black Hexagon Kitchen Cabinet Handle Cupboard Door Drawer Pull

Product information

Matt Black Kitchen Cabinet Hexagon Handle with 160mm Hole Centres A stunning rounded bar handle with a unique hexagon design wrapped around the middle. Along with a matching hexagon shaped knob, this handle and knob combination are the perfect match for your home cabinets. Ideal for anywhere around your house, from bathroom to kitchen, to bedroom, and being in the modern matt black finish, adding contrast to your home. These handles are sold individually, so the price displayed is for a single item. Measurements: 160mm Handle - 160mm Hole Centres (distance between screw holes) - 170mm Length - 10.3mm Width - 33.5mm Projection These handles & knobs are made from zinc and finished in a subtle, modern Matt Black. Installation Each handle is supplied with two M4 x 25mm fixing screws and is easy to install. If your door/drawer already has a handle or knob fixing, you may be able to unscrew the current pull and replace it using the existing hole(s). If this is your aim, make sure to choose new handles with the same size hole centres (distance between screws). If no holes are present, a small hole(s) will need to be drilled into your door or drawer to suit the chosen hardware. Once drilled, simply attach the handle/knob to the screws through the holes and tighten with a screwdriver.

• Guarantee - 1 month
• Fittings & fixings included
• Compatible with - Kitchen, Cabinet, Wardrobe, Furniture, Cupboard, Door, Drawer, Dresser, Bedroom, Bathroom
• Clean lightly with warm, slightly soapy water and dry with a soft cloth. Avoid all rough, textured cloths, sponges & towels. Do not use abrasive chemical cleaning products, bleach or rubbing disinfectant.
• Installation Each handle is supplied with two M4 x 25mm fixing screws and is easy to install. If your door/drawer already has a handle or knob fixing, you may be able to unscrew the current pull and replace it using the existing hole(s). If this is your aim, make sure to choose new handles with the same size hole centres (distance between screws). If no holes are present, a small hole(s) will need to be drilled into your door or drawer to suit the chosen hardware. Once drilled, simply attach the handle/knob to the screws through the holes and tighten with a screwdriver.

Features and benefits

• 160mm Hole Centres (distance between screw holes)
• 170mm Length x 10.3mm Width x 33.5mm Projection
• Matt Black Finish
• Made from Zinc
• Supplied with 25mm M4 Screws for Easy Installation