SKIP20A AURA 900MM DRAWER KITSFC

Zaky b - 4 / 5 - 05/05/2016

Great once fitted properly

These are great once glued properly and then fixed on brackets and into the sanctions at top,

JACQ - 4 / 5 - 08/12/2011

RussfromMountsorrel - 4 / 5 - 17/10/2011

Good

The draw fronts are only pegged and glued on so you need to allow time for the glue to set before you use the draws.

HJPC - 2 / 5 - 02/10/2010

Not a hanging drawer.

As engineer I would decided not to risk such heavy carcasses on the framework. By the time you open drawers (with overhang), I believe the drawers will detach/fall in no time, or take frame down with it. As free standing drawers, directly on top of each other within wardrobe, they are fine, though in retrospect I may have shopped around for drawers designed as free-standing in 1st place. Only benefit is ability to chop/change stack height/position to suit individual needs.

ncianca - 2 / 5 - 17/07/2010

Drawers are very fragile

The drawers are very fragile. Don't put this on brackets. Use wheels instead.

johnjohn - 1 / 5 - 08/07/2010

Avoid

Incredibly expensive for what it is. Looks like it'll be a good sturdy piece of furniture when you start building it as the outer carcase is so thick. Alas the drawers are dismal with incredibly light density sides that are held to back and front in a very flimsy fashion. The base is only hardboard and for a wide drawer like this, it's just not sufficient. The drawer fronts don't fit squarely in the unit and the whole design is just too wide as we have real difficulty in ensuring sliding doors don't foul on the drawer. B&Q very nearly had this sent back to them. Really really disappointing