Brass-plated Metal Flush Door hinge N162 (L)50mm (W)50mm, Pack of 8
Product details
Product information
These brass effect metal flush hinges are suitable for use on small cupboard/louvre doors. Fixings supplied for quick and simple installation.
- Only fixings included
Specifications
| Pack quantity | 8 |
|---|---|
| Hinge type | Flush |
| Location | Internal |
| Plating | Brass-plated |
| Product length | 50mm |
| Product width | 50mm |
| Material | Metal |
| Product code | 03207574 |
Reviews
2.14 / 5(7 reviews)PWT58 - 5 / 5 - 03/02/2023
Easy to use and fit
I bought the hinges for a home project. They were easy to fit, perfect for the job.
Lee_Royal - 1 / 5 - 20/12/2022
Wrong screw size cheap screws
The screws supplied are the wrong size for the holes, I've had to use my wood countersink drill bit to modify the hole so that the screw sits flush, after ruining my drill bit the screws either snapped or stripped they are that soft metal. Had to return and buy more screws. AVOID!
Cchh557 - 1 / 5 - 20/02/2022
Not happy
The screws that are supplied are weak- when you tighten them up into softwood the heads shear off.
useless1 - 1 / 5 - 28/12/2021
absolute rubbish
screws dont grip, will need to buy more,waist of money
Mike 173372 - 1 / 5 - 27/05/2020
You get what you pay for.
The screw round out with the slightest Bit of pressure. The hinge pins are bent so when in the closed position the door doesn’t align. None of the hole are in line so when you reverse mark the holes they are out when you “attempt” to use the cheeseium screws.
Upset in Catford - 3 / 5 - 16/08/2016
They do the job but need some modifying.
As the previous reviewer said the screws are made of cheap soft metal so mostly useless! The biggest problem is the hinges not closing flush due the the countersinking in the hinge bodies causing the screw heads to stand proud and prevent flush closing. I used a 6mm HSS drill to deepen the countersinks to allow the screw heads to sit flush with the hinge surface to enable the doors to close flush..
diybob64 - 3 / 5 - 29/03/2016
Good Hinges but get Replacement Screws
I bought these to fit to some custom MDF doors that I made. The hinges did the trick perfectly, but I had to buy a set of replacement screws (3x20mm). The ones supplied had malformed posidriv (PZ1) sockets, were soft and either broke off or became unusable after being done up once.