Colours Oak Satin Doors & windows Wood stain, 750ml
Discontinued
Unfortunately, we no longer stock this item
Product details
Product information
You can apply this woodstain from Colours to , using a brush, to colour and provide protection. It takes 30 minutes to dry and will cover up to 20 m² per litre on average.
- Suitable for Wood
Features and benefits
- Rainproof in just 30 minutes
Legal information
- Contains 2,2',2"-(hexahydro-1,3,5-triazine-1,3,5-triyl)triethanol and 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Safety data sheet available on request.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Colours |
|---|---|
| Colour | Oak |
| Finish | Satin |
| Location | Exterior |
| Base | Water-based |
| Volume | 750ml |
| Coverage | 20m² |
| Drying time | 30 min |
| Recoat time | 2 hours |
| Application method | Brush |
| Product code | 03204672 |
Reviews
3.2 / 5(5 reviews)oaktree13 - 1 / 5 - 24/03/2020
Rubbish
Flakes after days , complete waste of time and cash.
- 1 / 5 - 02/10/2018
Appalling, possibly the worst paint/varnish ever!!
I bought this to colour my conservatory windowsill. Sanded down to bare wood, vaccumed off then wiped over with white spirit and left to dry. Tin was stored at room temp, started applying with a quality new brush, the varnish just started clummping and dropping 'bits' everywhere over the surface, persevered thinking it was my technique, ( I have been doing DIY for nearly 40 years) but to no avail, just got worse and worse, the stuff was just 'balling up' and the surfaces of the sill looked like sandpaper. The brush is now ruined, the colour is down now, but will need to lightly sand smooth and purchase another product to make it 'smooth'. AVOID!!!!! B&Q should be ashamed of selling this useless product.....
PSCa - 5 / 5 - 01/08/2017
It did the job
Ibought this product to stain some plywood for sign at my sons wedding. They looked great
Rich10 - 4 / 5 - 20/06/2017
Does exactly what it says on the tin!
Have used something like this before. I use it on a garden table I built about 15 years ago. I give it 2 coats a year and it looks great. It dries in about 15 minutes on a warm day so don't take too long using it, otherwise it could cause difficulty. Just get on, apply then smooth it then leave it alone..I do like the fact it's water soluble, I'm normally not a fan of water based wood varnishes but this works a treat. This is quite a bit cheaper than, say, Ronseal, but it's as good.
seaviewjim - 5 / 5 - 03/11/2014
Just as it say's on the tin !
I bought this for some floating shelves I was making out of bare CLS spruce. I applied as per instructions it was easy to apply it took 3 coats and the finish is flawless.