18 people bought this in 48 hours
Cooke & Lewis Jonha Chrome effect Kitchen Top lever Tap
Offer - 20% off when you spend £2500+ on kitchen products. Discount applied in basket.
Product details
Product information
This chrome finish top lever tap from Cooke and Lewis' Jonha range brings a stylish finishing touch to your kitchen. It's suitable for high pressure systems.
- Comes with 2x 1/2" BSP female flexible braided hose with built in pre-filters and fixings and installation instructions
- Operation: Single lever
- Suitable water pressure: High pressure
- Hose supplied
- Guarantee - 10 years
Features and benefits
- A single lever control makes this tap extremely easy to operate. It’s easy to use with one hand so works well in a bustling kitchen
- Fitted with a Neoperl water saving aerator that regulates the flow of the tap and helps you save water with every use
- Features an anti limescale spout that rubs clean, making everyday maintenance and cleaning your tap easy
- This tap is a great for those looking for minimal design combined with the functionality of a pull out spout. The extended reach is ideal for washing plates or filling vessels too big for your sink - the perfect addition to busy households!
Specifications
| Aerator | Built-in aerator |
|---|---|
| Connection type | Compression |
| Depth (mm) | 260mm |
| Effect | Chrome effect |
| Height (mm) | 194mm |
| Hose length | 360mm |
| Material | Brass & stainless steel |
| Maximum operating pressure | 5bar |
| Weight (g) | 1320g |
| Width (mm) | 55mm |
| Product code | 3663602929963 |
Safety Information
Manufacturer / EU responsible person
Reviews
2.15 / 5(26 reviews)Spiderrio - 2 / 5 - 15/04/2024
Sink mixer tap
I purchased this last month when I came to fit it the 2 feeds (hot and cold ) were not for this tap and I had to find the right size for this tap.
Heligolander - 4 / 5 - 19/02/2024
Nice tap, flawed instructions
A nice tap. Although chrome was scratched. Fitting instructions failed to mention a washer was needed at the bottom of the fixing post between it and the nut which the extending hose fitted into. A cheap nasty paper washer was in the package. But instructions didn't say this was what it was for. I was going to post a photo of thenoffending page of instructions, but you can't upload photos it seems. Another flaw on the very fallable B&Q website!
Andrewildman - 1 / 5 - 30/10/2023
Missing parts
Sounds like there's terrible quality control issues with this product. Clearly missing 2 O rings so the tap leaked terribly after installation. Instructions don't give anything away so it's been a process of installing and taking apart over and over to figure out which bits are missing
Zs1990 - 5 / 5 - 02/08/2023
Does the job
Great, sturdy and weighty. Good quality product. Would recommend
Dana66 - 5 / 5 - 26/06/2023
Battery
It is easy to instal, turn around, long phone, tap I can move
kuticinks - 1 / 5 - 10/06/2023
weak product
While I was fitting, the thread snapped very easily and quickly. it took 3 hours to fit it, it is not worth it...
Lou8956 - 5 / 5 - 03/06/2023
Pleased with this purchase
Easy to fit. Functionality is great. Very pleased with this product. Didn’t experience any of the problems from the other reviews. I would recommend.
Shazznay - 5 / 5 - 13/01/2023
Good value for money.
I brought this product about a month ago. I didn't want the industrial look, but I did want to have the option of the extension on the tap. It looks great in the kitchen. The plumber did moan about fitting mind.
Rex65 - 1 / 5 - 13/11/2022
Rubbish
I fitted this tap and it's a lot of work, to find the hot water tap didn't work and it cause a airlock in my whole water system, but being new I just presumed I'd done something wrong, went through every thing I could think of to sort it, but it got to point the only thing left was the new tap, so I removed the hot water feed connected a isolating valve to a flexible pipe connected it and turned everything back on again opened the valve the air and pressure nearly blew the bucket out of the cupboard, reconnected the tap still not going the actual tap lever did nothing the tap valve stayed shut, good quality check done at the factory NOT wasted my money and more importantly my time
JSinHerts - 1 / 5 - 21/10/2022
Waste of Money and Time
A tap is designed to do one simple job - to distribute water. This one doesn't do that!!! What a complete waste of my time fitting it only to find water doesn't flow through it at anything more than a dribble! How on earth did this get through quality control and go to market?!!