Cut Hardboard Hard board Hardboard (L)1830mm (W)610mm (T)3mm
Discontinued
Unfortunately, we no longer stock this item
Product details
Product information
This Hardboard Sheet can be used for Boxing-in, drawer linings and cupboard backs
- CE marked
Features and benefits
- Floor covering, furniture manufacture, packaging, toy manufacture, general DIY
- To condition: rub clean water into the mesh surface of the board with a brush or clean mop, using about half to 1 litre per 2440x1220x3mm board. The treated boards should be neatly stacked wet side to wet side in an unheated building for 48-72 hours
- Light, versatile high density panel
- Made from responsibly sourced, Forest Friendly timber
- Floor covering, furniture manufacture, packaging, toy manufacture, general DIY
Legal information
- Extinguisher type - water. Explosion hazard - none for the raw material, however, airborne dust particles may present hazard. Effective dust extraction. Smoking should be prohibited.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Metsä Wood |
|---|---|
| Length (m) | 1.83m |
| Location | Internal |
| Material | Hard board |
| Pack quantity | 1 |
| Thickness (mm) | 3mm |
| Width (mm) | 610mm |
| Product code | 5022652560065 |
Reviews
4.5 / 5(2 reviews)Stu30 - 5 / 5 - 11/01/2013
Unlike Others
Over the years I have used many types of hardboard and whilst most of them look the same they are not the same quality. This particular brand is defiantly a cut above the rest. It doesn’t rip or peel away like other cheap brands and it is very easy to cut and touch up.
Frednerk - 4 / 5 - 09/05/2012
Headboard
The item was used as a baseboard on a framework to make a headboard for our super kingsize bed. This will be covered in foam and material. Product is ideal for this purpose.