See more Light bulbs
Diall B22 7W 810lm Classic LED Dimmable Filament Light bulb
Clearance
Product details
Product information
This Bayonet Cap (B22) classic LED filament light bulb has an impressive low energy A++ rating. It has a 7W power consumption, which is equivalent to a 60W bulb and gives off a warm white light.
- Dimmable
- Energy rating - A++
- Life length - 10000h
Features and benefits
Reasons to choose LED technology;
- LED bulbs last longer, their life time is more than 10000H
- Full brightness instantly, warm up time to 95% of lumen if LED is <lt/>1.0s
- They are more energy efficient; An incandescent light bulb loses 80 percent of its energy to heat, leaving only the last 20 percent for light.
Specifications
Brand | Diall |
---|---|
Bulb type | Classic |
Cap fitting | Bayonet cap (B22) |
Colour rendering index (CRI) | 80 |
Colour temperature | 2700K |
Equivalent wattage | 60W |
kWh per 1000hr life | 7kWh |
Lamp lumen maintenance factor (LLMF) | ≥ 70% |
Light technology | LED |
Lumens | 810lm |
Model name/number | STA6043 |
Pack quantity | 1 |
Power output | 7W |
Product diameter | 60mm |
Product length | 114mm |
Switch cycles | 20000 |
Voltage | 240V |
Warm up time | 1sec |
Product code | 3663602909361 |
Reviews
Perfect
AJRaffles - 3 years ago
Lovely warm colour... not too sterile... and wonderfully bright. I have a good feeling they'll last longer than the average light bulb cos they cost a little more than usual.
Good dimmable bulb
Gingerzac - 3 years ago
Struggled to find any suitable dimmable bulb for over my dining table, but this one is good. Has a good brightness range with the dimmer switch and the filaments look quite pretty when turned down low (don't confuse this bulb with the decorative incandescent ones though). Makes a very low humming noise, but not enough to be annoying.
Dial Bayonet Cap (b22) 7w LED Filament Classic
Montyog - 4 years ago
Purchased a few week a go, delighted with the light and hopefully will have many years use from it.
Fancy lightbulb
Stockings - 4 years ago
Disappointed that the filament doesn't glow yellow when the light is on.
Good
Ric777 - 4 years ago
Does what is supposed to do
Light on and thers brith room