Dimplex FX20VE Wall Mounted Downflow Fan Heater with Pullcord & Runback Timer - 2kW

Product information

With their compact design, FX downflow fan heaters are the popular choice for discreet wall mounted heating in a variety of different locations within the home including, bathrooms*, toilets and utility rooms. The powerful 2kW output ensures a fast warm up, although 1kW output is selectable on installation for smaller rooms. Visual on/off indicator, full safety protection and are simple to install. These products are suitable for intermittent use in domestic applications.

Features and benefits

• 230-240V AC 50Hz. Adjustable power setting at time of installation (1kW or 2kW). Energy saving 30 minute runback timer automatically switches heater off
• Heater can be manually switched off before time period expires. Pull cord operation. Cord located on right hand side, 420mm long. 2kW maximum output
• Easy to install. IP22 rated. *Suitable for location outside zone 2 in bathroom / shower area locations
• Manually resettable thermal overload cut out and thermal fuse link safety devices. Designed for connection to fixed electrical installation (no cord or plug supplied)
• Cable entry located at the top of the rear of the product. Wall mounting - Fixing by means of two upper keyhole slots together with a third fixing hole. Same fixing points as previous Dimplex FX heaters
• Should be located min 280mm from ceiling, 250mm from wall and 900mm from floor. Complies with LOT20 of the ERP directive
• Class I - earth connection required. UKCA, CE and BEAB approved
• Dimensions: 242mm high x 229mm wide x 109mm deep