EcoPro Loft Ceiling Insulation Kit (15m2 Coverage) Insulate under your rafters to retain energy and reduce bills.

Product information

Did you know that 25% of the energy you are paying for escapes via your roof? Why not simply staple our Loft Ceiling (Under Rafter) Insulation Kit to the underside of your rafters and start saving on your energy bills. Leaving your loft space poorly insulated, or worse - uninsulated effectively means you are consuming 25% more enegy than necessary than someone who does have effective loft insulation installed. Why should you install the EcoPro Loft Ceiling Insulation Kit? (Otherwise referred to in the trade as under rafters) Firstly, its a a simple installation method that requires no PPE and any individual that is competent at DIY can install this. It helps to retain heat energy in the winter, but also reflects away any excess heat in the summer. Its also thin, without compromising on performance and is exceptionally good value for money. If you require more than 15m2 - simply order multiple to suit your coverage requirements.

• Global warming potential (GWP)Zero global warming potential
• Guarantee - Statutory
• Without HCFC
• Zero ozone depletion potential
• Not fire resistant
• Fittings & fixings includedFittings & fixings included
• Comes with 1 x EcoQuilt Expert Insulation Roll 1.5 x 10m (Covering 15m2) 1 x Heavy Duty Staple Gun Kit, Including 5,000 x 14mm Staples, 1 x Multifoil Insulation Scissors
• This DIY Insulation Kit should be installed on the underside of your roof rafters, in your loft - to reflect heat back in to your home and cold away. It is also commonly used to reflect excess heat away too.

Features and benefits

Our EcoPro Loft Ceiling Insulation Kit (1.5 x 10m) provides 15m2 of insulation coverage. This is simple to install, you roll the multifoil insulation out and simply staple to the underside of your roof afters, until you have complete coverage. Desipte compressing to just 5mm when installed, the performance and value of this product is exceptional. It equates to 100mm of Glasswool / 50mm of PIR and it is easier to install. You therefore not only save on space, but you also save on labour time too. This insulation kit comes complete with everything you'll need for the installation. When installed, you will reap the benefits of the reflectivity and layers and you will start to retain the heat and reflect the cold away.

• Retains Heat Energy in Your Home - Reduces Energy Bills
• Equivalent to 100mm of Fibre Glass / 50mm of Rigid Board Insulation
• No PPE Required – No Harmful Fibres
• Exceptional Value for Money
• Easy to Install - Thin, Flexinble - without compromising on performance.
• Installation Equipment Included
• Can install two layers, without reducing available space in the room
• Free Delivery