Everbuild External Frame Sealant Brown C3 Size Cartridge

Product information

EVERBUILD EXTERNAL FRAME SEALANT is an acrylic sealant, suitable for internal and external use around window and door frames. The product provides a permanently flexible long lasting seal that adheres to virtually all materials. It contains a powerful anti-fungicide to prevent mould growth, and can be overpainted. Benefits Permanently flexible Adheres to most surfaces. Mould resistant. Overpaintable. Easy clean up Certified under the harmonized European standard EN15651 for fa ade interior and exterior applications in compliance with the Construction Product Regulation. Areas For Use Internal and external sealing around timber and metal window and door frames, Internal sealing around Pvcu window and door frames. Sealing cracks and gaps in brickwork, stone and concrete. Limitations Not for use in conjunction with bitumen or asphalt. Not for use externally when rain is imminent (within 6 hours at 20 C, 24 hrs at 10 C.) Note that damp or humid conditions may significantly extend the cure. Do not attempt to abrade when cured. Do not overpaint until a surface skin has formed (allow 24 hours). Overpainting is recommended externally to prologue the working life of the product especially in areas prone to high/low temperature variations. Note: this product is a flexible. Certain poor quality paints (especially certain vinyl matts) have very little movement in the dry film. It is possible for the dry paint film to crack if movement is excessive. Do not use externally around Pvcu Use Silicone 450. Surface Preparation All surfaces must be clean and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Highly porous substrates such as new plaster should first be primed with Everbuild PVA bond diluted 1:4 with water. This product can be applied to slightly damp, but not wet surfaces. Application Cut the tip of the cartridge taking care not to damage the thread. App

• Guarantee - Statutory
• Suitable for Interior & exterior use
• For General-purpose

Features and benefits

Specification Colour - Brown Form Ready to use thixotropic paste. Specific Gravity 1.64 - 1.68 g/cm3 Elongation at break (%) >200% ISO8338 Hardness (Shore A) Approximately 30 Tack Free Time 15 to 60 mins, dependent on thickness, ambient temperature and humidity Application Temp. Range +4 C to +40 C Service Temp. Range -15 C to +75 C Slump Resistance No slump at 25 C when placed in a 20mm x 10mm vertical channel Full cure 3 to 5 days, dependent on thickness, ambient temperature and humidity Solids content ~80% Chemical Resistance Dilute Acids - Fair Dilute Alkaline - Fair Aliphatic Hydrocarbons - Fair Aromatic Hydrocarbons - Poor Movement accommodation Low to medium (+/- 12.5%) EN15651-1 Durability Up to 15 years when used as recommended Shelf Life Up to 36 months when stored in unopened cartridges under cool dry Conditions. AVOID FROST Compatibility Can be used in contact with most building and decorating materials but Should not be used against bituminous materials. Limitations Should not be used in conditions of continuous immersion, below ground level, in areas of high abrasion (e.g. floor joints) Classification Sealant ISO 11600 F12.5P

• Specification
• Durable and Weatherproof: Creates a long-lasting, permanently flexible seal that withstands harsh weather conditions.
• Colour - Brown
• Mold-Resistant: Contains anti-fungal properties to prevent mold growth, keeping your home protected.
• Form Ready to use thixotropic paste.
• Specific Gravity 1.64 - 1.68 g/cm3
• Elongation at break (%) >200% ISO8338
• Hardness (Shore A) Approximately 30