See more Wastes, traps & overflows
FloPlast 2 bowl Kitchen sink waste kit, (Dia)40mm
Part of the drainage system, this double bowl sink waste kit from FloPlast is made from hard-wearing polypropylene and has a compression fitting type. It's suitable for plastic pipes to bs 5254 and bs 5255, copper waste pipes to bs 659 and bs 2871..
- Comes with Full 76mm seal
Not moulded correctly
Geth - 1 month ago
Bought this in B&Q Barnstaple to replace our leaking sink trap. Got all the way home and on opening the packet discovered one of the screw ends was completely miss moulded in the factory so no way of making a seal. Very poor quality control. Unfortunately this meant a 45 min round trip for my wife to source a replacement. Cheers B&Q, I will by better quality next time!
Traffy - 2 months ago
Seemed a good quality product until you find out that several of the screw fittings don’t tighten up as they should !
Avoid at all cost.
Ended up having to use part of another kit to finish a simple job.
don’t buy! Don’t buy!
Timothy Godfrey - 3 months ago
Really cheap seals and general poor quality. Spent over four hours trying to get it to seal. Finally gave up and bought a slightly more expensive one from McAlpine - better quality and all installed in 10 minutes!
Mr G Goodwin
Scaff52 - 3 years ago
I bought this item a week ago, after I have cut the parts to size I fixed it to sink and after a week it fell apart. I have fitted items like this before with no problem. I find that the trouble with this item is the very fine plastic ring dose not grip the pipe hard enough they to thin.
Ept - 5 years ago
Made from cheap material which split after one week absolutely rubbish