Form Alchimy Steel Shelving bracket (H)200mm (D)150mm
Product details
Product information
Perfectly supports shelving to help you store your belongings
- Fixings sold separately
- Compatible with 150 to 300mm shelves
- Locate wall studs and mark mounting locations on the top hole of the brackets, ensuring the holes are level. You should install brackets into all possible studs along the length of your shelf for stated load capacities. Partially install screw into marked holes at stud locations leaving a small gap for bracket adjustment. Place the top hole of the bracket onto screw and push down to secure. Use screws to secure the bottom of the bracket into the stud. Tighten down the top screw. Rest shelf on brackets. Use screws to secure the board to the brackets
Features and benefits
- The epoxy finish helps to prevent rust and ensures a long-lasting colour
- The maximum load shown may be lower depending on wall condition. All loads should be distributed evenly
Specifications
Maximum load | 40kg |
---|---|
Model name/number | MB5 |
Pack quantity | 1 |
Product depth | 150mm |
Product height | 200mm |
Product weight | 137.2g |
Product width | 33.8mm |
Range | Alchimy |
Product code | 3663602764588 |
Reviews
3.6 / 5(5 reviews)Bladders - 5 / 5 - 19/04/2023
Excellent product
I purchased this to fit some shelves and they are just the job
Jamie1907 - 5 / 5 - 11/04/2023
Wall bracket
I got these to put up some shelves they are strong and sturdy. Great buy
RaviGonte - 2 / 5 - 30/01/2022
Not square against the wall or shelf board
They look sturdy but neither the side that mates with the wall looks straight nor the one that supports the shelf board.. It leaves a weird gap that does not look aesthetically good. However, I also wonder how well it would support if its not flat.. I will find out as I have only used these for a few hours now.. Also, as someone pointed out, choose the correct rawl plugs; as the brackets are hollow they tend to strip the plugs out..
Brian the builder - 4 / 5 - 03/10/2021
Great product
Great product - you just need the correct rawlplug and screw.
cat1860 - 2 / 5 - 04/08/2020
Doesn't look good
OK for a shed or garage but if you care at all about appearance -- avoid. The smart-looking coating arrives scratched and they're not square so leave gaps against the wall or under the shelf.