See more Paint


Right chevron


Right chevron
Left chevron
GoodHome Extreme Exterior Masonry Matt Emulsion, Base A, 236ml Tester pot
Right chevron

GoodHome Extreme Exterior Masonry Matt Emulsion, Base A, 236ml Tester pot

Sold & shipped by B&Q

per l

Offer - 20% off exterior paint mixing. Discount applied in basket.


Sorry, the colour you chose is not available in this base. Please select a different colour or finish.

Product details

Product information

    Test out your favourite GoodHome colours at home, so you can make sure you have the perfect colour and finish before you start decorating.

    • Suitable for Masonry
    • Surface Preparation - The surface to be painted must be clean and dry before application. Remove whitewash, chalky coatings, loosened material and efflorescence. Wear an appropriate mask to avoid inhalation of dust. Combine holes or other defects with a plaster. Apply a fungicide treatment to remove mold, algae, moss, lichen or dirt. It is advisable to let the cement or fresh concrete dry for a month before applying the paint. Use an exterior primer or stabilizing solution on powdery or weathered surfaces.
    • Instructions for Use - Stir before use if necessary. A brush, roller or sprayer can apply an even coat and cover similar colors. Two coats are required on new surfaces to cover contrasting colors and allow warranty to apply. The paint is waterproof an hour and a half after application (it may take longer in cold or wet conditions). Only apply the paint in temperatures between 10°C and 30°C and in dry weather. Avoid application in direct sunlight or when surfaces are hot. This pot should cover 25m². However, coverage will be less when applied to uneven surfaces. You can apply a new coat after 4 hours.
    • Guarantee - Statutory

    Features and benefits

    • Self-cleaning
    • Superior, long-lasting colour
    • Resistant to Mould
    • GoodHome Extreme Weather Protection Matt Emulsion is a highly durable paint offering extreme weather protection and resistance against surface mould. It also has a self-cleaning formulation, meaning your new colour will look fresh for longer with no hassle for you.


    Application methodBrush or roller
    Drying time90-150 min
    Instructions for storageStore the product in a dry environment at a temperature between 5 ° C and 30 ° C
    Maximum application temperature30°C
    Minimum application temperature10°C
    Minimum touch dry time2h
    Number of coats2
    Paint base densityLight base
    Recoat time2-4 hours
    VOC levelNo VOC level recorded
    Product code5059340345727