48 people bought this in 48 hours
GoSystem Autostart Blow torch AT2071H
Product details
Product information
This GoSystem auto-start blow torch warms up in one minute with use at any angle for precise flame control. Suitable for DIY tasks such as paint stripping, plumbing and soldering.
Features and benefits
- It can reach a temperature of 1600°C.
Specifications
| Brand | GoSystem |
|---|---|
| Compatible gas type | Butane |
| Maximum operating temperature | 1600°C |
| Model name/number | AT2071H |
| Product height | 182mm |
| Product length | 180mm |
| Product weight | 197g |
| Product width | 105mm |
| Product code | 5036720207110 |
Reviews
2.5 / 5(32 reviews)Barry206 - 1 / 5 - 18/10/2023
Didn’t last long
Bought 2 for use in kitchen but both have now failed. 1 has only full on or full off and other has gas coming out of outside burner fing instead of middle
J606 - 5 / 5 - 05/10/2023
Does exactly what it’s supposed to do.
Bought this for use in cooking for Charing and creme brûlée, does a great job.
Jock - 5 / 5 - 30/06/2023
Great blowtorch
This is a great blowtorch works very and did the job in no time thank you.
Phil P - 4 / 5 - 02/02/2023
Good blow torch....
... I have had a few over the years and I am sure I have a good one here. It sorted out my soldering no problem, no leaks. I have rated the price as fair during these dark days of consumer purchasing. Ease of use is good and it comes with its own base for standing support. This torch will also light my summer bbq's with ease.
Gaz Edinburgh - 1 / 5 - 07/12/2022
Perfect blow torch.
I bought this blow torch as I had a job needed doing kept putting it off! Glad i bought this as its very handy and easy to use!
DarcyM - 1 / 5 - 23/06/2021
It went on fire
Worked well until it caught fire. No idea why you keep refusing to publish this, it's what happened to the item I bought from you.
DarcyM - 1 / 5 - 22/06/2021
Worked very well until it went on fire
Worked very well until the seal at the gas flow adjustment intake stopped working properly and the unit went on fire.
DarcyM - 1 / 5 - 21/06/2021
Went on fire
Worked great for a few years, then it went on fire and the top section started to melt. Very lucky to have had a fire extinguisher nearby and am glad it didn't explode. Called B&Q Lisburn and they 'weren't even sure if it was wear and tear' that caused the fire and wouldn't say on the phone if they'd take my full cannisters as well as the faulty unit. Local Council won't accept it at the recycling depot, so now I'm waiting for the fire brigade to call me back to see how I can get rid of it plus the cannisters.
Discruntledcustomer - 2 / 5 - 16/09/2020
Unsafe
I don’t know whether i got a bad model or this is standard but it worked for a bit then when I pointed the torch head up to solder some pipe the flame became 6 inches long and I couldn’t turn the torch off. Overall I would recommend spending an extra 25 pounds on a MAPP gas torch.
kjkjljl - 1 / 5 - 01/09/2020
Not very well designed
I bought this blow lamp seven months ago because it has an integral ignition system, it worked ok for the first five months but now not working, I think it needs the nozzle cleaning but its possible with this unit as the nozzle is too far back . so now back to using my old gas blow lamp. So make sure you can clean the nozzle before buying a new gas blow lamp.