59 people bought this in 48 hours
GoSystem Flux paste & rod, 28g
Product details
Product information
This GoSystem Flux Paste comes equipped with a brush. The kit facilitates smooth solder application, ensuring robust, long-lasting metal joints. Perfect for both professional and home projects, it's a toolkit staple for quality results.
- Guarantee - Statutory
- Lead-free
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | GoSystem |
|---|---|
| Model name/number | AS6000 |
| Pack quantity | 1 |
| Weight (g) | 28g |
| Product code | 5036720600010 |
Safety Information
Manufacturer / EU responsible person
Reviews
1.09 / 5(42 reviews)leeii337 - 1 / 5 - 15/12/2023
Not so great
This stuff is very hit or miss. Unfortunately its the misses that ruin the job.
Kreepy22 - 1 / 5 - 04/06/2023
This product is completely useless
Needed some flux urgently. This rubbish does not function, when heat is applied it chars on the fitting. I’m a professional plumber, B & Q should immediately remove it from sale.
Round the U bend - 1 / 5 - 01/06/2023
Absolute garbage...
Kicking myself, for not reading reviews, before wasting my money on this junk. Spent ages getting all my pipework pristine. All joints fluxed (Ha ha ha.) Started at one end, and.... Nothing... No solder ring forming around the fitting. Just a load of blackened, charred pipe... I never even knew it was possible to make a substance, that fails on every point... Look out B&Q. I'm bringing it back tomorrow. And I will not be buying a replacement from you.
Jezza1234 - 1 / 5 - 29/04/2023
Absolute C**p!!
As other reviewers have said, it burns off immediately and does not work. Wasted hours of my time and the cost of many fittings and pipe. We have no heating and hot water in the house currently. DO NOT BUY this useless product. BnQ should be ashamed.
mrnothappy99 - 1 / 5 - 19/03/2023
DO NOT USE THIS FLUX!
Bought some to put in a new towel radiator as I wasn't sure where my old pot was. Every joint I used this on failed and I have had to strip everything down and do it all again. This flux just boils off and doesn't draw the solder into the joint. I used pre-soldered fittings with extra solder and none of the solder bonded. It has cost me extra fittings and extra time to resolve. This flux is not fit for purpose and should be removed from the shelves!!!
Often1 - 1 / 5 - 04/03/2023
Does not work
New to soldering, I wish I’d read the reviews as it does not work.
SPW33 - 1 / 5 - 18/02/2023
Shockingly bad
Doesn't work, burns straight away. Waste of time and materials
Johnnyrb - 1 / 5 - 05/02/2023
Absoute c***
After spending a long time positioning up a complicated assembly with lots of fittings and pipe I was unimpressed to see that no solder was visible at the edges when the solder ring connectors were heated. After reading the other reviews, definitely I would agree that the flux is disappearing before facilitating the joint. It looks all watery and c* and guess what? it is. Complete waste of time, effort and materials.
NOT HAPPY ALAN - 1 / 5 - 14/01/2023
ABSOLUTE RUBBISH
Why do B&Q sell this product its useless, wasted time, fittings and money on this rubbish, it just doesn't work.
- 1 / 5 - 16/12/2022
Big waste of my time trying to make it work
tried to make solder flow, blamed myself for fails, so bought more fittings wasted more time and money ! burns very quickly stopping the solder flowing no matter how you try.