See more Decking Boards


Right chevron

Outdoor & Garden

Right chevron


Right chevron

Decking Boards

Right chevron

Green Softwood Deck board (T)24mm (W)120mm (L)2400mm

Was £13 £9
Save £8
Checking availability...
Checking availability...

Our bulk delivery service requires a minimum order value of £100 across any combination of bulk delivered products. You can change the quantity in the basket.

Product Details

Product Information

This non slip green deck board combines a specially formulated mixture of resin and aggregate and pressure treated softwood deck board. The resulting product provides not only an attractive alternative to traditional timber decking but also a safe slip resistant surface in wet or dry conditions.

    Features and Benefits

    • Pressure treated to protect against fungal and insect attack for longer life. The treatment of this product gives it a green colouration
    • Ensure surfaces and ends (especially cut ends) are completely sealed when staining to protect against the elements and this will ultimately extend the life of your decking
    • We recommend you treat your timber decking annually with decking stain, varnish or paint to prolong its life. Lightly sand surfaces and ends to allow treatment to penetrate sufficiently through decking for maximum protection.
    • Precision finished
    • Kiln dried for stability

    Health and Safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

    Technical Specifications

    Individual board thickness24mm
    Individual board width120mm
    Individual board length2400mm
    Colour descriptionGreen
    Timber typeSoftwood
    Kiln driedKiln dried
    TreatedPressure treated
    Fitting instructionsPre-drilling is not necessary. Can be fixed using standard coated deck screws / nails or secret fix deck clips. We recommend face fixing with 2 x 63mm coated deck screws at each joist. Supports should be set at a maximum of 450mm centres. A slight fall should be incorporated in to the design to help improve drainage.
    Product code3663602165316