See more Elbows
JG Speedfit Push-fit 90° Pipe elbow (Dia)15mm, Pack of 10
- 25 years Guarantee
- Kitemark approved
- For use with Hot & cold water systems
Features and benefits
Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
- Push-fit and demountable connections
- Suitable for hot and cold water and central heating systems
- Grip and Seal connection
- Lead free and non toxic
- No scale build up and corrosion Free
|A size (imperial)||0.59"|
|B size (imperial)||0.59"|
|Lead-free||Lead-free & non-toxic|
Best plastic fittings I've used
simond528 - 11 months ago
These fittings take the stress out of DIY plumbing, I've never had a leak with them and you can easily disconnect them again should you realise your pipe needs to be a little shorter. Works a treat with copper or plastic pipe - but if using plastic pipe, remember that you need pipe end inserts fitted otherwise they will leak whatever connector you put them in!
Early morning fitter - 4 years ago
Compared to other plastic plumbing fittings,they really are at the bottom of the heap and are very much a last resort when choosing similar products.