Kidde KF30LL Firex Mains Powered Heat Alarm with Longlife Lithium Back-Up Battery

Product information

Normally installed in locations where there is a high risk of false alarm caused by routine use, e.g. Kitchen, Garage and Boiler Rooms. These locations are often overlooked when in fact they are the riskiest places for fires to start. Heat Alarms should always be used in conjunction with Smoke Alarms, they will not provide adequate protection on their own. Heat Alarms operate at a fixed temperature (57°C) and will not react at all to smoke alone. As a minimum you should install a Heat Alarm in your Kitchen and / or Utility Room. These alarms can be installed to provide a fire detection system to comply with British Standard BS 5839: Pt.6 Grade D "System incorporating one or more interlinked mains powered smoke alarms (and heat alarms if required), each with an integral stand-by supply.

• Guarantee - 1 year

Features and benefits

• Mains voltage 230/240V AC 50Hz. Non replaceable long life lithium battery backup (battery included)
• Alarm memory identifies source alarm on interconnected system. 57°C fixed temperature trigger
• Hush feature. 85dB(A) loud alarm. Multi-function LED indicates power and alarm status
• Class A2. Can be interconnected (using cables) with up to 23 smoke / heat alarms of same brand / range
• The normal wiring method for these alarms is 6242Y 1 or 1.5mm (twin & earth) from the power supply, which can be either a dedicated circuit at the consumer unit or a local normally used lighting circuit, to the first alarm position then 6243Y 1 or 1.5mm (3 core & earth) from the first alarm to the second alarm and so on. The maximum circuit length is 250 metres.
• Approvals BSI certified to BS5446 Part 2: 2003. UKCA & CE certified
• Dimensions: 133mm diameter x 45mm deep