Lambda sensor sockets / oxygen sockets / removal / fitting 3/8in 1/2in drive

Professional tool for commercial or occasional use. Manufactured from chrome vanadium steel and impacted for strength and durability For removal, inspection or replacement of heated and non heated oxygen sensors fitted to the majority of vehicles. Most popular vehicles that they fit include Audi / BMW / Mercedes / Peugeot / Renault / Skoda / Vauxhall / Opel / GM / Volkswagen Suitable for Titania and Zirconia oxygen sensors found on almost all modern vehicles. Cut away sections allow sockets to fit over wiring harnesses. SET Includes; (please refer to picture below) PICTURE A 1/2" drive 29mm x 90mm deep socket with 8.2mm wide long groove PICTURE B 3/8" drive 90mm deep socket with 20.5mm wide long groove PICTURE C 1/2" drive 27mm x 85mm deep socket with large side viewing window. PICTURE D 3/8" drive 22mm x 80mm deep socket with 7.7mm wide long groove PICTURE E Offset square drive socket with 8.6mm wide full length groove PICTURE F 3/8" drive 27mm x 74mm deep socket PICTURE G Offset square drive deep socket 22mm x 49.5mm with 11mm wide full length groove Supplied in a blow molded storage case for easy storage and transportation