17 people bought this in 48 hours
LAP White 45A 2 way 1 gang Raised slim Cooker Switch
Product details
Product information
This 45A cooker switch is intended for kitchen use and allows for the isolation of hardwired cookers.
- Guarantee - 2 years
- Terminals accept up to 16mm² cable
- Rocker
Features and benefits
- Combines great engineering with an elegant, slimline design
- Requires a 35mm back box
- For your safety, electrical products must be installed in accordance with local building regulations. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self-certification scheme.
Specifications
| Brand | LAP |
|---|---|
| Model name/number | H8176 |
| Colour | White |
| Pack quantity | 1 |
| Material | Urea |
| Switch/socket profile | Raised slim |
| Number of ways | 2 |
| Screwed/screwless | Screwed |
| Power voltage supply | 250V |
| Number of earth terminals | 2 |
| Number of gangs | 1 |
| Voltage suitability | Mains voltage |
| Minimum box depth required | 35mm |
| Amp rating | 45A |
| Insert colour | White |
| Number of poles | 2 |
| Product code | 05301386 |
Manufacturer / EU responsible person
Reviews
4.66 / 5(6 reviews)Davy123456 - 5 / 5 - 09/11/2023
Switch
Bought 3 to replace old switches. Simple design, perfect for what I needed.
J23sept - 5 / 5 - 13/09/2023
Good Value Switch
Does what it needs to do, simply install and looks fine
Trebor 53 - 5 / 5 - 29/06/2023
Very nice item, easy to fit
Needed to replace light switch on wall as DIY and paint job looks good and easy to fit
Switchman 9 - 5 / 5 - 21/06/2023
Very modern
I have old square square switches which stick out about 8mm. The house is being modernised, and the Slim Light Switches look great :-)
Mart95 - 5 / 5 - 09/01/2023
Switch
Looks good was easy to wire up will buy again ……..
Patient 6 - 3 / 5 - 04/01/2023
Nice looking product but..
Switch is aesthetically very neat and the switch mechanism has a smooth and positive feel. BUT the grub screws are flimsy and deep within the switch structure, so difficult to gauge the access. One of the grub screws unfortunately fell out and then after disconnection of the successfully terminated conductors it was a really fiddly job to get the loose grub out of the back and re-seated into the thread. Then because the grubs appear flimsy over tightening is a judgement call. But when done it was a neat product.