24 people bought this in 48 hours
Leyland Trade Dark grey Metal & wood Undercoat, 750ml
Product details
Product information
Apply this undercoat from Leyland Trade to interior & exterior , using a brush or roller, to prepare the surface for painting. It takes 16-24 hours to dry and will cover 17 m² per litre on average.
- Solvent-based
- Suitable for Metal & wood surfaces
- Brush or roller application
- Instructions for Use - Stir well before use. Suitable for application by brush or roller. The brush should be fully loaded for best results. Do not thin. Apply one or more coats as required and allow 16-24 hours drying between coats under normal conditions. Do not apply over polystyrene surfaces
Features and benefits
- Great covering power
- Provides adhesion
- Leyland Trade Undercoat is the ideal foundation for Leyland Trade High Gloss paint. Suitable for interior and exterior use providing a smooth surface on both wood and metal.
Legal information
- Flammable liquid and vapour. Contains 2-butanone oxime. May produce an allergic reaction.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Leyland Trade |
|---|---|
| Colour | Dark Grey |
| Coverage | 12.75m² |
| Drying time | 16-24 h |
| Location | Interior & exterior |
| Pack quantity | 1 |
| Recoat time | 16-24 hours |
| VOC level | High |
| Product code | 5010426773018 |
Safety Information
Manufacturer / EU responsible person
Reviews
4 / 5(4 reviews)A no more painting - 5 / 5 - 28/08/2024
Ok
It done what it was supposed to do. Painted well and that's all folks.
weymouthtyke - 1 / 5 - 30/07/2023
Really poor
I bought this as my son wanted his gaming room all black, so reluctantly I prepared the new door frame, architrave and skirting boards for painting. the frame is new pine and the skirts and architrave are new MDF. I opened the tin and stirred the very thin paint for a good three minutes, I would probably say that the consistency is like good washing up liquid. Unfortunately the paint isn't very good coverage at all, especially all the edges of the surfaces where I was struggling to get any paint to stick. After 24 hours I lightly sanded the surfaces, cleaned them down and repainted them. The paint did take better on the flat surface but the edges I was still struggling with, I certainly didn't want to overload the surface as it would definitely leave runs and drips. Throughout my refurbishment I've used other branded white undercoats on the exact same surfaces and had perfect results so I'm going to ditch this product and never touch this brand again!
Kevurmston - 5 / 5 - 24/10/2017
Great paint
Leyland - good quality paint at a fair price. Covers well goes on easily.
Klingonborg - 5 / 5 - 26/08/2015
Good paint
Used this on metal external doors following rust treatment and primer application. The application was easy and finish smooth for the gloss coat. Watch out for the drips!