178 people bought this in 48 hours
Loctite Extreme 1 Min Epoxy Glue 11ml
Under 18 yearsProduct details
Product information
Smooth Surfaces with extreme speed: the Loctite Extreme 1 Min Epoxy Glue – Transparent, Instant-Mix, Multi-Material! Smooth surfaces and fill gaps fast with the high-strength epoxy resin.
- Guarantee - Statutory
- Suitable for Ceramics, metals, plastics, stone & wood
- Resistant to heat & moisture. Waterproof
- Store in a dry, cool place
- 1. Lightly sand surfaces. Ensure the surfaces are clean and dry. 2. Snap off tip of syringes. 3. Push nozzle onto syringe and rotate 90 degrees anti clockwise to lock into place. 4. Push down syringe plunger until nozzle is full of adhesive. 5. Apply adhesive onto one surface. 6. Press parts together firmly. 7. Remove excess adhesive using methylated spirits. 8. After use remove and discard nozzle. Wipe tip of syringe with tissue. Apply resealable cap immediately
- See safety data sheet
Features and benefits
- Instant-Mix - Use the powerful glue to bond smooth surfaces and uneven gaps, with the instant-mix syringe for automatic mixing
- Multi-Material– This strong adhesive performs well on most materials such as wood, metal, porcelain, stone, concrete, glass, leather, textiles, polystyrene or plastics* and can be used on large surfaces. *(except PE/PP)
- Clear - This all-purpose glue dries clear, allowing a natural finish on a range of surfaces achieving a persistently high-quality bond, every time
Legal information
- Contains 1,2-benzisothiazol-3(2H)-one, C(M)IT/MIT(3:1) and methylisothiazolinone.May produce an allergic reaction.Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Application method | Nozzle |
|---|---|
| Bonding strength | Extra strong bond strength |
| Container type | Tube |
| Drying time | 1 min |
| Location | Interior |
| Maximum application temperature | 40°C |
| Minimum application temperature | 5°C |
| Model name/number | IDH2506278 |
| Odour | Medium odour |
| Sandable | Sandable |
| Solvent-free | Solvent-free |
| Volume | 11ml |
| Weight (g) | 9.5g |
| Product code | 5010305060192 |
Safety Information
Manufacturer / EU responsible person
Reviews
1.81 / 5(16 reviews)doItLee - 1 / 5 - 18/04/2025
Poor poor product.
I wanted Araldite but the B&Q I visited didn't stock it. This seemed like the drop in replacement but the stupid nozzle mechanism needed me to poke holes in it manually before it would work, and even then the plungers wouldn't press equally -- one of them just jammed all the time making the thing very difficult to use. I then realised that you need a disposable attachment every time you use the glue, and only two come with the pack. So you have enough glue for 10 applications easy, but only two nozzles, and it dries so fast once mixed that you can't even really batch uses together. What a waste of time and money.
Zelda18 - 1 / 5 - 25/08/2024
absolutely waste of money
syringe system useless: only 2 syringes supplied so after two uses you cannot use. it sets before you can actually get it out of the syringe. worst glue i’ve ever used, wanted old fashioned epoxy supplies in 2 tubes but couldn’t find anywhere. DO NOT BUY
BigW62 - 1 / 5 - 07/06/2024
Utterly useless
This product is worthy of zero stars. The complicated syringe mixing thing wastes a lot of the product and is single use at best - I couldn't get it to work even once. Once I did get the product out it set too hard to use within about 10 seconds. My old two tubes of Araldite worked well and lasted me for years. Only bought this because I couldn't find two part Araldite in separate tubes. After two attempts of using this hopeless Loctite stuff it is now in the bin. Do not waste your money
Lenny R - 1 / 5 - 14/03/2024
A joke
Deficient: it does not set. Neither in 1 min nor in 1 hour.
Mac D - 4 / 5 - 29/01/2024
Great product
Great product, but find that the supplied mixing nozzle is a waste of product as there is an amount that can not be used stuck in the nozzle. But the epoxy it's self is fantastic.
Maggie2099 - 1 / 5 - 02/09/2023
Buyer beware
Please be aware that you only have two nozzles with this glue. So if you want to use it on several project you can’t and end up having to throw the vast majority of it away. Could not buy the self mix glue. A big con to make you buy glue that you are unable to use
Sacrifyce - 3 / 5 - 12/07/2023
Great quick setting epoxy
Great for quick setting epoxy. If you want a fast setter then this is the guy. Nice and clear too Only issue is i would yave liked yo have 4 nozzles not just 2. Would probably buy again
aballyTKD - 1 / 5 - 13/03/2023
Rubbish product
Bought this product for a repair on a broken plastic part. Its failure to bond to the plastic is not the issue - the stupid impractical packaging and ridiculously short window during which the adhesive remains workable is. Total rubbish. Syringe did not function correctly, causing delay, which led to the workpiece being ruined.
ESL21 - 4 / 5 - 12/03/2023
Sticks like *****
Bought yesterday to fix a few things where other glues had failed. Great for soles of school shoes and a china vase
StillyStillser - 2 / 5 - 29/11/2022
Loctite extreme epoxy
bought this glue as I needed strong adhesive to glue furniture. The nozzle and syringe set-up does not work very well and I had to use a knife to cut the plastic to make the glue flow at all. The syringe did not work very well and I ended up having to spread the glue using a scraper which made the application very messy. So I am not impressed.