500W 220-240V 76mm Corded Mini saw MSMCS500
Electrical recycling service
Thinking about buying a new electrical product from us? Find out about our electrical recycling service here
Product details
Product information
Compact, powerful saw allows both 1 and 2-handed use. Highly versatile, making light work of straight cuts in wood, plasterboard, plastic and tiles.
- Guarantee - 2 years
- Comes with 1x HSS blade, 1x TCT blade, 1x diamond blade, 1x hex key, 1x dust tube, 1x edge guide and instruction manual
- Includes Carry case
- Includes plug
Features and benefits
- Built-in laser guideline generator ensures precision and a more accurate cut
- Dust extraction keeps your work area free of dust
Specifications
| Blade change method | With tool |
|---|---|
| Brake type | No brakes |
| Brand | Mac Allister |
| Cable length (m) | 2.5m |
| Compatible blade diameter | 76mm |
| Dust extraction type | Dust extraction facility |
| Grip type | Soft grip |
| Length (mm) | 390mm |
| Model name/number | MSMCS500 |
| Motor type | Brushed |
| No load speed | 7600rpm |
| Number of teeth | 24 |
| Pack quantity | 1 |
| Power voltage supply | 220-240V |
| Riving knife | Without riving knife |
| Spindle lock | Spindle lock |
| Switch type | Trigger switch |
| Product code | 3663602795834 |
Reviews
2.61 / 5(18 reviews)Jaycee 55 - 1 / 5 - 19/04/2023
No use
Go to trim plywood sheets. Could get it t ct square then laser packed in after 1 use. It’s back in its box probably never to be used again. Not worth the money. Should have got a full size one
Remmers - 2 / 5 - 13/12/2022
Doesn't lock and laser went wonky!
Bought for some simple diy cutting some floor planks. After first use the laser button fell off and the laser itself went wonky and led to a very bad cut! Must have vibrated loose or something. The fact that you have to press a button to plunge the shield and then can't lock it into place is very frustrating. Basically unusable for flexible edges because of the amount of pressure you have to put on it to plunge the shield. Very disappointed.
Èdd2 - 4 / 5 - 16/11/2022
Great little saw
Brought this for a small job and now used it on many a job. The only thing is where can you buy the 76mm blades from? I can only find 85mm
ImiSid - 4 / 5 - 08/10/2022
DIY strength only
I didnt want to pay for a channeling tool, so I used this for a small DIY job to embed pipe work, I used the diamond blade to cut the channels guided by the laser, it worked superb, nice clean cuts, make sure you have the vac attached on, good for strength, works well but gets hot and out of steam after heavy use, bit like AJ in boxing, never the less a great value for money tool to keep in the shed for them small projects.
Yea - 2 / 5 - 13/07/2022
It’s ok.
It does cut 12mm plywood pretty good but the base plate is slightly out of square so can’t make boxes very good also the Allen bolt on the blade was so tight it just rounded off. Wouldn’t buy another.
louiseb88 - 4 / 5 - 09/05/2022
Pretty good
I bought this to cut some wood flooring… and it does the job pretty well! It took a little bit to get used to, but overall it’s been great! The laser got stuck on and ran out of battery though but can still cut straight without it. Won’t cut through anything thicker than 2cm though!
mojodurkin - 5 / 5 - 22/09/2021
Excellent quality
Excellent product for price,highly recommended it and in stock
Boatbuilder123 - 1 / 5 - 29/08/2021
Absolute Trash
Like everyone else, I found the base plate spring insanely strong. Bolt also sheared while trying to change blades. Really should issue a product recall on this, as I would say its downright dangerous to use.
Drew53 - 4 / 5 - 16/03/2021
can't fault it
Bought this about 4 years ago & cant fault it been used to cut new inpsection hatch in floor, numerous laminating projects and cutting/making and installing new doors. still going strong - although laser alignment went south after about 6 months
Sawgirl - 2 / 5 - 03/03/2021
Disappointing
The base plate was impossibly difficult because the spring was so strong it had to be held down with fingers near the cutting blade. The blade nut snapped after one change and now one part is buried in the housing. When it cut it was a nice clean quick cut but overall pretty hopeless.