150mm Junior hacksaw
Discontinued
Unfortunately, we no longer stock this item
Product details
Product information
With 24 TPI (teeth per inch), this 150mm long, carbon steel junior hacksaw from Mac Allister is specifically designed to cut for small cutting jobs in metal and wood.
- 150 mm Carbon steel blade
- 24 teeth per inch
- Suitable for Metal & wood
- Soft grip handle handle
Features and benefits
- Simple blade tensioning
- 2 years
Specifications
| Blade length (mm) | 150mm |
|---|---|
| Blade material | Carbon steel |
| Brand | Mac Allister |
| Handle type | Soft grip |
| Pack quantity | 1 |
| Teeth per inch | 24 |
| Weight (g) | 120g |
| Product code | 5052931340903 |
Reviews
2.56 / 5(16 reviews)Mum can fix it - 5 / 5 - 02/01/2018
Great product!
This product is a good weight and perfect for little jobs around the house. Great value for money.
Ady jay - 1 / 5 - 07/12/2017
Poor quality
I bought this and at first cutting small items it was good I then attempted to cut through a roll of material with a soft metal hollow centre and plastic strip it get 3/4 through and fell to pieces the arc came out of the handle leaving 3 separate pieces so it ended up in the bin
Topdog19 - 3 / 5 - 24/10/2017
Looks good
First impressions were favourable but appearances can be deceiving.Very lightweight,the blade fitting was not positive and was quite ineffective in use.
fanaacapan - 5 / 5 - 18/10/2017
as expected
It did what it should do handle bteer than cheaper models
manxmike - 1 / 5 - 21/06/2017
Not very strong
Within a few minutes of use the blade bent badly and could not be used,
1987mike - 1 / 5 - 06/05/2017
Rubbish
Brought this today to cut off a small nut. Only made it about 3mm through the nut and it's already blunt. It may have only cost a couple of quid but that's not the point. A complete waste of money. Stay away and put an extra couple of quid towards it and get a better one
grumpydiyer2 - 1 / 5 - 03/05/2017
Bloody terrible
Not fit for purpose. Very difficult to tighten blade-stay sufficiently, so the stay rotates, blade twists, and it won't cut in a straight line. Occasionally, to add insult to injury, the blade will pop out entirely. Avoid like the plague - better off with a cheap bent steel job.
Sassy2013 - 1 / 5 - 02/04/2017
Terrible!!
Bought this today to cut a small bolt.... it hasn't even made a mark on the bolt at all... waste of money and time!
Danevs74 - 5 / 5 - 13/02/2017
How much??? I will take 10
So what do I say and where do I start? This piece of kit is less, yes guys less than a Fiver.... and does the job that is expected from a million dollar piece of kit. So a definite for the tool box, grip is great and overall design is awesome
MoDMan - 5 / 5 - 06/02/2017
Did the job well
Used for cutting 3 blinds to size. No problems. Blade starting to get blunt but lasted well for the duration of what I needed it for. Cant go wrong for £3ish.