Makita SP6000J1 240V 165mm Plunge Saw with 2 x Rails, Connector Bar, Clamp & Bag

Electronic speed control

Constant speed under load

Double insulation

2 x Makita 1.5m guide rail

Makita SP6000J1 240V 165mm Plunge Saw with 2 x Rails, Connector Bar, Clamp & Bag

Features:

Makita SP6000J1 Plunge Saw:

Close to wall cutting - Can perform a cut only 18mm away from the wall.

Non-Slip Rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use.

Depth Stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm.

Tip Resistant Design - sliding the lever prevents this tool from falling down towards blade case.

Connectable to a vacuum cleaner - keep workplace free from airborne dust particles. Sawdust ejection backwards for comfortable operation.

Easy Blade Replacement Design - Lever locks blade in replacement position, hex wrench can be used through hole in casing and is stored afterwards in the handle.

Comes With:

Carbide tipped blade

Connector carry case

2 x Makita 1.5M Guide Rail

1 x Makita 1.4m/1.5m Guide Rail Bag

1 x Guide Rail Connector

1 x Guide Rail Clamp Set

Product Specification

Makita SP6000J1 Plunge Saw:

56mm max cut @ 90° / 40mm max cut @ 45° / 38mm @ 48°

Blade Diameter: 165 mm

Depth of Cut @ 45º: 39 mm

Bevel Cut Range: 1 - 48 Degrees

Bore Diameter: 20 mm

Noise sound pressure: 91 dB(A)

Noise sound power: 102 dB(A)

Noise K factor: 3 dB(A)

Input wattage: 1300 W

No Load Speed: 2000 - 5200 rpm

Vibration K factor: 1.5 m/sec²

Vibration: Cutting Chipboard: 2.5 m/sec²