See more Floorboards
Maritime pine Floorboard (L)2m (W)140mm (T)21mm, Pack of 5
This thick whitewood flooring is simple to install and treated to be a long-lasting, luxury floor for your home.
Features and benefits
The irresistible natural beauty of solid wood flooring remains a popular choice for many. The look and feel of the woodgrain coupled with the thermal insulation properties of wood will make your chosen space one of tranquility and warmth. Solid wood flooring is susceptible to moisture and humidity changes, making it sensitive to seasonal changes, so you'll need to consider acclimatisation before installation but once laid, and with maintenance the hardwearing nature of wood flooring means it's a great long term option for your home.
- Pack of 5 boards
- End matched with T&G ends so boards don't need to be joined above joists, therefore reducing wastage
- Suitable for domestic applications in single family dwellings
- Suitable for use in the Hallway, lounge, dining room, kitchen, bedroom, playroom & conservatories
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Sam H S - 2 months ago
I’m renovating an old house and it was a struggle to find 140mm wide boards that weren’t from a reclaim yard. Laid 20m2 of these boards and they were great. Straight and solid. Use hidden screws for a perfect finish.
Good Boards if you're on a budget
josh2027 - 2 months ago
I Bought a large number of floorboards (somewhere in the region of 30 packs) to refloor my hall-lounge-dining room all as one continuous floor. I used 24grit sanding belts to level any bumps in the existing subfloor and then laid 5mm vitrex underlay. I then used 45x3.5mm tongue tite screws to secret screw the new boards to the floor.
To help lay the boards, I bought 3 flooring straps, a rubber mallet, rubber block, 18v Drill +1.5mm bits) and an 18v impact driver.
To finish the new floor, ive used 3 coats of linseed oil (mixed 50:50 with low odour white spirits) followed by 2 coats of satin osmo.
Ive only finished the hallway but so far am very happy with the results.
Some of the boards needed some persuasion to lay and some (but few) were waped, any warped boards I just cut and used as start or finish boards.
The boards were easy enough to work with, Yes Oak boards might be better and tougher, but that’d likely be twice the cost.
Overall I think this a great solution for anyone on a budget, like me.
Warped and crooked. Un-usable.
Edge1878 - 8 months ago
I appreciate wood will potentially cup but there is no excuse for selling machined tounge & groove wood that is crooked along the long edge. The pack I bought was unusable.
Dreadful quality and damaged inside the pack
Desert Traveller - 9 months ago
Bought the product shrink wrapped. checked the pack was flat but when I opened it the boards were very warped and i had to plane down the tongues to get them to link together. Two of the tongues were damaged in the middle of the pack. Avoid buy shrink wrapped packs as you can't check what you are buying. Wood cut well in a chopsaw and if you want a decorative finish it has quite a few knots.
Hard and mature wood
Anonymous - 1 year ago
This was labelled as maritime pine and it certainly was excellent quality. Slow grown dense wood. I might have been lucky with the pack I chose. I used it for a trestle table but it would have been perfect for flooring.