Masterlite Mains-powered LED RGB Strip light IP20 (L)3m
Electrical recycling service
Thinking about buying a new electrical product from us? Find out about our electrical recycling service here
Product details
Product information
This LED striplight provides long lasting and economical lighting, and is under cabinets. This light has a white casing and is operated by a remote rgb control switch. Bulb supplied.
- Only fixings included
- Guarantee - 2 years
Features and benefits
- High performance colour changing kit; click to one of fifteen colours or 3 auto change functions
- Adjustable brightness
- Complete kit with LEDs, cables, driver, remote control and plug
- LED is more efficient and longer lasting than any other lighting type for homes
- High performance colour changing kit; click to one of fifteen colours or 3 auto change functions
Specifications
| Bulb included | Bulb included |
|---|---|
| Cable length | 3000mm |
| Cap fitting | Integrated |
| Colour | White |
| Dimmable | Dimmable |
| Equivalent wattage | 15W |
| Location | Indoor |
| Material | Polymer film |
| Number of bulbs | 1 |
| Pack quantity | 1 |
| Switch type | Remote RGB control |
| Voltage | 240V |
| Product code | 5014838508114 |
Reviews
3.12 / 5(8 reviews)rustydiy - 2 / 5 - 29/08/2017
went bang
fabulous whilst it lasted, i built the wiring in to a degree so cannot remove intact for a refund. very disappointed as it had been used for less than 12hours in total and i shall have a terrible job ripping things apart to fit a replacement
Angelama - 4 / 5 - 06/04/2017
Fab lights!
I had a dilemma being in an old cottage with limited headroom and wanting something to light the entrance hall which was fun and discrete st the same time. I had seen these lights at various places and decided to bite the bullet and get them! I am chuffed! They are colour changing or static, give off. Slovely glow and fit the brief of being fun and discrete as they are hidden on top of my dresser.
Debandtone - 5 / 5 - 24/12/2016
Easy to install.Great results
After reading some reviews about the leds becoming unstuck,I was little apprehensive.I have fitted them under my kitchen cabinets and couldn`t be more pleased with the result.As long as you clean the surface before applying the led strip,you`ll be fine.I cleaned the melamine surface with methylated spirits.One word of advice,make sure you align the strip before sticking down.You have only have one go at this,you can`t realign it once its stuck. I would definitely recommend this product.
Splashash - 1 / 5 - 12/06/2016
Stopped working after 2 hours in
Just put these up last night and already the green has stopped working and the white is only white on one of the strips and a sort of pink on the other 2. Looks like I'll be taking them back today. Shame as they looked great for the few hours the worked:(
DavieP - 5 / 5 - 24/05/2016
Easy to apply good value for money too
Great product stays on well, but if you need to curve it, I found it was best to add some cable clips around the curve areas. Looks great and if you need to use more than one unit, the remote will work on all.
OwenH - 3 / 5 - 05/03/2016
Buy doubled sided tape or glue
The lights look good and in. All honesty are brighter than expected on brightest setting so well pleased. However the (lack of) adhesive bonding of the so called self adhesive is very poor for the price. Didn't even last 5 minutes. However, luckily had plenty of decent glue and lights look great now up and staying up!
- 3 / 5 - 07/12/2015
Look great but .....
Fell down hours after electrician wired them up to my new B&Q kitchen. Self Adhesive??? For a self adhesive product I would have expected them to stick a bit longer. As for the answer that says "stick some sticky-back plastic on" ....... that's pants ........ for the price paid I would expect them to stick. They looked good for an hour or so when they worked and had some great effects.
JJen - 2 / 5 - 27/09/2015
Very pretty lighting
I love these lights. The only problem is that I cannot make them stick to anything! They stay stuck to my windowsill for about 12 hours before falling off!