Metsä Wood Primed White MDF Torus Architrave (L)2100mm (W)69mm (T)18mm, Pack of 5
Product details
Product information
Decorative architrave is relatively easy to install, even for DIY enthusiasts. It typically requires a few simple tools, such as a saw, a miter saw, and a staple gun. The Metsä Wood primed mdf architrave is (L)2.1m x (W)6.9cm x (T)18mm, is a pack of 5. Our MDF architrave boards are machined from moisture resistant MDF before being primed with two coats of quality primer ready for installation.
- Comes with 5 x 2.1m lengths
- Create decorative feature for your walls
- Ready to paint, stain or varnish
Features and benefits
- Architrave is ideal as a surround for doors and windows
- Free from natural defects
- Pre primed. Apply top coat to achieve desired finish
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
Edge profile | Torus |
---|---|
Length (m) | 2.1m |
Location | Internal |
Material | MDF |
Thickness (mm) | 18mm |
Timber finish | Primed |
Timber type | Softwood |
Width (mm) | 69mm |
Product code | 5022652844127 |
Manufacturer / EU responsible person
Reviews
4 / 5(2 reviews)quark - 4 / 5 - 07/03/2016
Nice product but with a few negatives.
A reasonable product. MDF, so somewhat harder to cut than pine, and of course plenty of fine dust, so a mask is a must! Some minor damage but nothing that couldn't be easily filled. Biggest issue was that one of the boards was a few millimetres too small in depth. Nice and straight, no warping, but in hindsight I would go for pine, easier to cut, no fine, nasty dust.
DIY1972 - 4 / 5 - 07/02/2016
Worked well
These architraves were just what we needed to use as dado railed around our house. It is well made and takes wood dye well. I was also not difficult to use/hang.