SKIP19A -VALUE PINE SHELFBOARD 890X300MM
Discontinued
Unfortunately, we no longer stock this item
Product details
Product information
This unfinished shelf board is perfect for adding some simple extra storage to your room that can be painted or stained a complimentary colour or the same colour as your wall and shelf brackets.
Features and benefits
- Ready to paint stain or varnish
- Made from responsibly sourced, Forest Friendly timber
- Ready to paint stain or varnish
- Can be painted or stained to get the finish of your choice
Specifications
| Product code | 03436318 |
|---|
Reviews
3.5 / 5(4 reviews)RKW1 - 5 / 5 - 01/05/2018
great product
Easy to paint or you can use in its natural state. I would buy again.
TrudiandDan - 4 / 5 - 22/11/2017
Does what it is designed for
I brought 7 of these to put up dvd shelving in our study/library room. Look lovely when stained a rich golden colour.
- 4 / 5 - 30/01/2017
Good value for money
Having just moved home I am getting rid of some rough sawn plywood shelving in various cupboards. These shelves are solid wood strips bonded together to make a comparatively wide plank. The advantage is that the shelves are unlikely to warp. The disadvantage is that unless the whole width is supported the bond might break. One feature I liked is that one edge is rounded. There were more knots in the timber than I would have liked, but for my usage these will not show and are unlikely to reduce the strength of the timber. For a finish, the boards have three coats of linseed oil.
Linker3000 - 1 / 5 - 30/12/2015
Seriously poor quality
These are not solid shelves, they are made from several laminated planks. I purchased 4 shelves and at the checkout, the assistant noticed that one was split (the laminations had started to fall apart), so I swapped it out and we checked the other three shelves - they all looked fine, but when I went to fit them and removed the shrink wrap, two others were not laminated properly and were coming apart. I could not justify driving back to the store, so I applied some wood glue and bound the joints overnight. There's 'value', and there's 'barely fit for purpose' - but that wouldn't fit on the product label.