65 people bought this in 48 hours
Unfinished Pine L-shape Moulding (L)2400mm (W)45mm (T)27mm
Product details
Product information
Its rounded L-shape angle provides a great solution for rough edges where two boards meet to add a smooth, straight and soft edge
- Green star claim - This product's wood is certified by a third party. Information about the third party can be found on the product packaging.*
Features and benefits
- The product can be seamlessly added to the existing decor to enhance the ambience
- It is easy to fix using pins or adhesive depending on the end use
- Made from high-quality Scandinavian pine, the product is enduring and long lasting. It also gives a sophisticated touch to the existing décor
- Ideal for decorative purposes commonly used for beading around walls, doors, and other surfaces
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Edge profile | L-shape |
|---|---|
| Length (m) | 2.4m |
| Location | Internal |
| Material | Pine |
| Thickness (mm) | 27mm |
| Timber finish | Unfinished |
| Timber type | Softwood |
| Weight (kg) | 1.23kg |
| Width (mm) | 45mm |
| Product code | 3663602872191 |
Manufacturer / EU responsible person
Reviews
4 / 5(6 reviews)Kezla - 4 / 5 - 07/04/2025
Great
Great dimensions and shape. Application was simple
AJR27 - 4 / 5 - 24/03/2025
Produit correct en dimensions, mais un peu escessif en terme de prix
Améliorer lle prix en le baissant tout simplement.
Joel - 5 / 5 - 25/02/2025
bon produit
Produit correspondant à mes attentes
Whyisthisrequired - 5 / 5 - 23/02/2025
Quality moulding, takes paint well will do the job
Good straight moulding, which will do the job well.
Pepy - 5 / 5 - 08/12/2023
Excellent
Excellent accroche et lissage
big_john - 1 / 5 - 08/05/2021
Defective manufacture
The L-section mouldings that were delivered to me had deep grooves cut into the sides along their entire length. This was clearly because the machine being used to make them was not set up properly. Their structural rigidity is seriously impaired by this. Don't buy these unless you can see and check the actual pieces that you are buying.