10% off everything online for one week only | Offer ends 9 December
See more Elbows
Plumbsure Push-fit 90° Pipe elbow (Dia)15mm
Features and benefits
Our Plumbsure Copper Push Fit range makes jointing easier, faster and more cost effective than other jointing methods - a fittings system which simply pushes together in seconds to create a perfect joint, every time.
- Improved installation time over traditional methods
- Perfectly clean internal bore (less finishing/cleaning required)
- No localised annealing from high temperature working
- No carbon deposits (less risk of corrosion)
- System does not need to be ‘dry’ for effective jointing
mplumber - 6 months ago
I bought 5 and 3/5 were really rubbish. As soon as you turn water on it leaks out. Fitting felt secure and the other 2 were fine but the rest were really rubbish. They look better than regular push fit but I won’t use again
Solb4u - 1 year ago
Felt I needed to add this review because previous reviews unfair. If you use these in the correct way and clean the pipe with wire wool before seating they work first time every time. Beware though, do not use these with plastic pipe, use copper pipe which has been cut using a pipe cutter and then clean with wire wool prior to push fitting. You won’t be disappointed. I only used to solder until I found these and now I swear by them
Anonymous - 2 years ago
Used two to fit a bathroom wash basin and both leaked as soon as the water was switched on. Waste of time. Wished now I’d done it with some proper joints, a blowtorch and solder.
Work great - if pipe is properly prepared.
JonGD - 2 years ago
First time I used these it leaked but once you learn to prepare pipe correctly they work great and are so quick.
Make sure the pipe end has a lead-in (auto cutter helps), the end is burr-free, polish with fine wire wool and push in nice and square. Job done!
Answer the question - 2 years ago
It says demountable, so How do I remove the thing.