Ronseal Clear Matt Fence & shed Preserver, 5L

Product information

You can apply this wood preserver from the Ronseal Total range to , using a brush, to provide protection. It takes 24 hours to dry and will cover up to 8 m² per litre on average.

• Guarantee - Statutory
• Suitable for Wood
• Make sure the surface you’re protecting is clean, dry and free from paint, varnish or stain. Use a stiff brush to remove ingrained dirt. If you notice any mould, fungi or algae, use a garden cleaner to get rid of it. If there is paint, varnish and stain on your wood, you will need to strip it or sand it away. Decayed wood should be replaced with healthy timber. Replace at least 45cm past the rotted area to get the best results.
• Give the tin a good shake so you get a consistent colour. For the end grains of your fence, dip them into the preserver so the wood is completely soaked. For the main sections of your fence panels, dip a brush and apply the stain. Wait 24 hours for the first coat to dry. You will need three coats for the best protection. Leave 24 hours between each coat. Avoid contact with bitumen, bitumen felt or mastics and plastics. Low temperature and increased humidity will increase drying time.
• Instructions for Use - Give the tin a good shake so you get a consistent colour. For the end grains of your fence, dip them into the preserver so the wood is completely soaked. For the main sections of your fence panels, dip a brush and apply the stain. Wait 24 hours for the first coat to dry. You will need three coats for the best protection. Leave 24 hours between each coat. Avoid contact with bitumen, bitumen felt or mastics and plastics. Low temperature and increased humidity will increase drying time.

Features and benefits

• Suitable for preserving all types of interior and exterior wood
• Protects against woodworm attack and infestation
• Suitable for overpainting
• Prevents rot and decay