See more Floor paint & treatments
Ronseal Diamond hard Medium oak Satin Floor Wood varnish, 2.5L
This medium oak floor varnish from the Ronseal Diamond range can be applied to interior using a brush. The varnish dries in just 30 minutes and will cover up to 18 m² per litre on average.
- Suitable for Wood
- Give bare floors a good sand then wipe down with white spirit. For previously painted floors remove all previous coatings & sand down.
Features and benefits
Want a floor varnish that lasts? Look no further. With Diamond Hard protection, this floor varnish from Ronseal will keep your wooden floors protected and looking great for longer. It'll protect your floors from knocks, scuffs, spills and heels, so it's ready for whatever daily life throws at it.
- Non-yellowing so you won't need to reapply as often
- Quick drying in just 30 minutes
- Ensures your wooden floors are protected and stay looking great
- Low odour so it's more pleasant to use
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||30 min|
|Recoat time||2 hours|
Goes on almost orange
Coomber27 - 9 months ago
Dreadful colour that doesn't resemble the tin at all.
Spent nearly a week sanding and prepping our stair case to stain.
Chose this as colour as the rest of our house is a beautiful medium oak.
So disappointed I actually cried, paid nearly £50 for 2.5litres and the stairs look absolutely dreadful they don't match the rest of the wood at all, not even close, the stairs are now basically orange.
Not at all the colour on the tin
HouseOwner - 3 years ago
We got this varnish for our floors, thinking it would be a nice looking 'medium oak' colour. but it turned out way more red toned than we could have ever anticipated and looks NOTHING like the front colour. Super disappointed.
Love this product
Suzeeeeee - 3 years ago
This is a great product. It dries quickly to a tough finish. You wash the brush in water. And it gives a good colour which evens out any imperfections. It's a bit pricey but it covers a lot and it's well worth the expense.
Great product, deceptive colour descriptions.
Painter2000 - 5 years ago
After spending weeks prepping the floor, researching products and colours, I chose this Ronseal medium oak. The application and finish are great but the colour bears so little resemblance to that illustrated I could cry. Far from a mellow warm shade I am faced with a very dark chestnut colour more reminiscent of a 'hides everything' pub floor. What to do with the remaining litre and a half, what to paint the staircase with that won't clash hideously and how to get more sun in to start the (hopefully!) fading process? Hugely disappointed.
Doesn't do what it says on the tin
Romac - 5 years ago
Goes on reasonably well, as a previous review says ensure you take time on the first coat. I put 5 coats onto a sanded pine floor and it does have a rich colour but after approximately 5 months I will now have to re-paint the hallways and living room as its started to wear through to the bare wood.
If your floors are anything other than perfectly level with no lumps, bumps or slightly raised edges on floorboards etc then it will begin to wear unevenly. For a product that calls itself 'Diamond Hard' and is formulated specifically for floors it doesn't live up to its name.