Save on kitchens, bathrooms and bedrooms. Thresholds apply. Look out for the offer tag on qualifying products. Shop now >
See more Wood preservatives & treatments
Ronseal Garden Clear Matt Decking Protector, 5L
Sold & shipped by B&Q
£
34
£
6.80
per l
Checking availability...
Product details
Product information
You can apply this decking protector from Ronseal to , using a brush, roller or spray, to provide protection. It takes 90 minutes to dry and will cover up to 6m² per litre on average.
- Guarantee - Statutory
- Suitable for Hardwood & softwood
- Ensure decking is free from all dust, dirt, oil, mildew, algae and other contaminants. Remove all existing loose, flaking or peeling coatings. For best results clean surfaces thoroughly with Ronseal Decking Cleaner and Reviver prior to application and allow to dry thoroughly. Ensure all cleaning residues are completely washed away to maximise the performance. Always test on an inconspicuous area before starting general application to ensure the desired result will be achieved.
- Shake well and pour into a suitable container. Get loads of Protector on your brush or pad and apply evenly over 2 or 3 boards at a time in the direction of the grain. If you find that the Decking Protector has pooled in the ridges of the deck after 15 minutes then use a brush to spread these pools of Decking Protector to dryer areas. For maximum protection apply 2 coats. Re-coat as soon as the first coat is dry (maximum 2 hours). Be careful not to leave too long between the coats, as the second coat may be repelled by the first coat. Allow 24 hours after applying second coat before using your deck.
- Instructions for Use - Shake well and pour into a suitable container. Get loads of Protector on your brush or pad and apply evenly over 2 or 3 boards at a time in the direction of the grain. If you find that the Decking Protector has pooled in the ridges of the deck after 15 minutes then use a brush to spread these pools of Decking Protector to dryer areas. For maximum protection apply 2 coats. Re-coat as soon as the first coat is dry (maximum 2 hours). Be careful not to leave too long between the coats, as the second coat may be repelled by the first coat. Allow 24 hours after applying second coat before using your deck.
Features and benefits
- Scuff resistant formula protects against foot traffic
- Wax rich formula for excellent waterproofing protection
- Control air pollutants by choosing products with lower solvent levels
- Scuff resistant formula protects against foot traffic
- This decking protector protects your deck from the effects of the sun and rain. The wax rich formula creates a superb barrier against water penetration, and helps prevent cracking and swelling of your deck caused by constant wetting and drying. It also protects against foot traffic with the scuff resistant formula.
- Translucent finish
Legal Information
- Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
Brand | Ronseal |
---|---|
Colour | Clear |
Finish | Matt |
Location | Exterior |
Volume | 5000ml |
Coverage | 6m² |
Recoat time | 2 hours |
Application method | Brush, roller or spray |
Number of coats | 2 |
Container type | Tin |
Base | Water-based |
VOC level | Low |
Washable | Washable |
Suitable use type | Decking |
Product code | 5010214864348 |