94 people bought this in 48 hours
Ronseal Problem wall White Matt Anti-mould paint, 0.75L
Offer - 3 for 2 on selected Valspar and Ronseal paint. Discount applied in basket.
See more products in this offerProduct details
Product information
This White matt anti-mould paint has been specially designed to give a durable and long-lasting finish on a range of surfaces. Simply apply with a brush and leave for 1-2 hours to dry - a great way to give the surfaces additional protection. Covers 13 m² per litre on average.
- Instructions for Use - Thoroughly stir the paint so the consistency is smooth. Pour the contents of the tin into a tray and coat your brush or roller. Wipe off any excess on the rim of the tray. Apply the first coat and wait four hours for it to dry. Apply the second coat and wait four hours for it to dry. If you can still see colour through the paint, apply more coats until the colour is no longer visible. Once you have applied the last coat, wait 24 hours before letting condensation build up in the room again.
- Remove any mould & sand off any flaking paint before applying.
Features and benefits
- Tough and scrubbable finish
- Resists steam
- Easy wipe-clean emulsion
- Lasts for six years
- Stops mould from growing
- Moisture & steam resistant
- Paint stays mould free
Legal information
- Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Ronseal |
|---|---|
| Application method | Brush or roller |
| Base | Water-based |
| Colour | White |
| Container type | Tin |
| Coverage | 9m² |
| Drying time | 1-2 h |
| Finish | Matt |
| Location | Interior |
| Minimum touch dry time | 1h |
| Number of coats | 2 |
| Paint type | Protector |
| Quick dry | Quick dry |
| Recoat time | 4 hours |
| RGB value | 255, 255, 255 |
| VOC level | Low |
| Volume | 750ml |
| Washable | Washable |
| Product code | 5010214866236 |
Documents
Safety Data Sheet
Safety Information
Manufacturer / EU responsible person
Reviews
3.76 / 5(34 reviews)NeilAkshayD - 5 / 5 - 05/04/2025
Overall good product
Happy with end result. But felt slightly on an expensive side.
Su75 - 5 / 5 - 02/04/2025
Works
This is brilliant appears to have kept the mould away
Smifffy family - 5 / 5 - 10/02/2025
Great product
Great product, easy to apply and so far no mould, would recommend
Sailor - 5 / 5 - 17/01/2025
Thick paint
I bought this to cover unsightly mould after it had been treated. It's a thick paint that appears so far to have done the job. Very pleased.
BogieDaw - 3 / 5 - 15/11/2024
This product is okay.
It has coverage, of course, but very difficult to apply to already painted bathroom ceiling, was too liquid and runny. Do not know when will get feedback from owner of bathroom to find out how it has performed.
AndyGRIP - 5 / 5 - 21/09/2024
Great product
Easy to use and easy to clean brushes after use. Does exactly what it says on the tin. 😁
colinrcs - 5 / 5 - 04/07/2024
Does what it says on the tin
Good value and an easy product to use. Covers mold in one coat
HWC87 - 4 / 5 - 26/03/2024
Did the job
Covers well, be prepared for how thick it is, and make sure the area is completely dry as will bubble and flack off if not
Dorothydee - 1 / 5 - 29/12/2023
Ron anti mould
Doesn’t work 4 coats and still can see my light cream thru
medako - 5 / 5 - 04/10/2023
Best for bathroom
Value for money, and very good quality, recommended for bathrooms.