32 people bought this in 48 hours
Ronseal Problem wall White Silk Anti-mould paint, 2.5L
Product details
Product information
This White silk anti-mould paint has been specially designed to give a durable and long-lasting finish on a range of surfaces. Simply apply with a brush and leave for 1-2 hours to dry - a great way to give the surfaces additional protection. Covers 13 m² per litre on average.
- Instructions for Use - Thoroughly stir the paint so the consistency is smooth. Pour the contents of the tin into a tray and coat your brush or roller. Wipe off any excess on the rim of the tray. Apply the first coat and wait four hours for it to dry. Apply the second coat and wait four hours for it to dry. If you can still see colour through the paint, apply more coats until the colour is no longer visible. Once you have applied the last coat, wait 24 hours before letting condensation build up in the room again.
- Remove any mould & sand off any flaking paint before applying.
Features and benefits
- Tough and scrubbable finish
- Resists steam
- Easy wipe-clean emulsion
- Lasts for six years
- Stops mould from growing
- Moisture & steam resistant
- Paint stays mould free
Legal information
- Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Ronseal |
|---|---|
| Application method | Brush or roller |
| Base | Water-based |
| Colour | White |
| Container type | Tin |
| Coverage | 30m² |
| Drying time | 1-2 h |
| Finish | Silk |
| Location | Interior |
| Minimum touch dry time | 1h |
| Number of coats | 2 |
| Paint type | Protector |
| Quick dry | Quick dry |
| Recoat time | 4 hours |
| RGB value | 255, 255, 255 |
| VOC level | Low |
| Volume | 2500ml |
| Washable | Washable |
| Product code | 5010214866267 |
Documents
Safety Data Sheet
Safety Information
Manufacturer / EU responsible person
Reviews
4.48 / 5(25 reviews)Das123455 - 5 / 5 - 10/05/2025
Good
Does what it said on the tin and dead the job well
Pickles26 - 5 / 5 - 04/02/2025
This product is fab
We’ve been struggling to find the right mould paint and this was perfect, the coverage is great and it looks fab. Will definitely recommend .
Fred0007 - 4 / 5 - 29/01/2025
Kitchen damp wall
I bought this product to cover the kitchen wall where there are damp patches. Coverage was good.
JmbL - 4 / 5 - 27/09/2024
Anti mould white satin paint
This is the second tin I have bought to cover my front room. On hindsight I should have bought the 5 litres not sure if that would have been cheaper. It did need 2 coats to cover the anaglypta wallpaper which was advised on the tin. You do need to use a mask as advised in the instructions and keep the area well ventilated. The overall look is good, it looks smooth and clean and just what I wanted. Its still drying after its second application yesterday. Time will tell if it prevents mould. There is a strong smell from the paint which does dissipate once dry after a few days. When the first coat dried it felt slightly tacky but I assume that is to do with the anti mould properties and chemicals in the paint.
CharlesEbbsworth321 - 1 / 5 - 25/07/2024
Not a good paint started flaking after 2 weeks
Paint started flaking after 2 weeks similar to another brand who have an industrial looking tub not happy u get what u pay for I suppose
Shahid187 - 5 / 5 - 23/03/2024
Very good product
I bought this mould paint it was very effective brilliant would recommend it
jill92 - 5 / 5 - 08/09/2023
great product
bought this and it does exactly what it says on the tin,
Kermit7391 - 5 / 5 - 26/07/2023
Great product and walls are protected
Great product and easy to use and walls are protected for a long time
Sandy23 - 5 / 5 - 22/06/2023
Easy to use but a bit thin
Bought this product last October to cover walls that previously had dampness problems, and so far so good! Thus, bought again last month to treat walls in another room. Only small issue is that it's pretty thin and several coats are needed for the expected end coverage.
Fitznmoll - 5 / 5 - 03/05/2023
Easy to use and covered well
Covered pretty well - I did put on 2 coats but could have left it with one. This was just 2 weeks ago but I did use the paint in another room and mould has not come back 3 years on.