Ronseal Xactly Interior Wood Satin Paint, Base 4, 2.5L

Product information

With Ronseal Xactly Colour Boost, you can keep your interior wood looking its best throughout the year.

• Washable
• Suitable for Wood
• Surface Preparation - Before you start, make sure the room is above 10C and well ventilated. If you're project is a floor, make sure you remove all the furniture from the room before you start.Bare Wood: Lightly sand the wood to give it an even finish. Use 120 grit sandpaper and sand in the direction of the woodgrain. Remember to wear a facemask. Clean up dust and wipe down with a damp cloth. Fill any holes or cracks with our Multi Purpose or High Performance Wood Filler.Previously Painted Wood: If your previously painted wood is in good condition, then you'll need to give it a sand using 120 grit sandpaper, making sure there is no loose or flaking paint. Use 120 grit sandpaper and sand in the direction of the woodgrain. Make sure you wear a facemask and wipe down the wood with a damp cloth. Fill any holes or cracks with our Multi Purpose or High Performance Wood Filler. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood as they mat contain harmful lead.Previously Stained Wood: Give the wood a good sand with 120 grit sandpaper, making sure there are no loose or flaking coatings. Remember to wear a facemask. Clean up any dust and wipe down with a damp cloth.
• Instructions for Use - Give the tin a really good stir. Check you're happy with the colour by finding a small patch of wood to try it on. Covering a dark stain with a lighter colour may not give you the colour you are expecting. Brush it on with a synthetic brush in the direction of the woodgrain. You'll need to put on 2 coats (3 coats on floors). Leave 2 hours between each coat. Give the surface a light sand with 240 grit sandpaper and wipe away any dust with a damp cloth before putting on the last coat. If you're using Ronseal Xactly Interior on a floor, you'll be able to walk on the floor in 8 hours. Leave 24 hours before bringing the furniture back in and be careful not to scrape on the floor. After 72 hours it'll be tough enough stand up to all of the everday knocks and scuffs.

Features and benefits

• Low Odour and VOCs
• Touch Dry in just 20 minutes
• Ronseal Xactly Colour Boost gives your interior wood ultimate colour, as well as protection, with just one can, providing long lasting protection that resists scuffs and scratches.