23 people bought this in 48 hours
Smith & Locke Black Powder-coated Steel Hasp & staple, (L)150mm (W)45mm
Product details
Product information
This 150mm hasp & staple is suitable for wooden doors. It's ideal for exterior use.
- Guarantee - 2 years
- Only fixings included
- Waterproof
Features and benefits
- Easy to assemble
- Staple hole size:15 x 12mm
- Fittings & fixings included
Specifications
| Colour group | Black |
|---|---|
| Location | External |
| Material | Steel |
| Model name/number | 2004 |
| Product length | 150mm |
| Product thickness | 1.5mm |
| Product weight | 100g |
| Product width | 45mm |
| Shackle material | Boron alloy |
| Product code | 3663602834359 |
Manufacturer / EU responsible person
Reviews
1.25 / 5(4 reviews)Justin - 1 / 5 - 04/11/2024
Sub standard design.
This hasp and staple is not fit for purpose. The U bend is press fitted into the bracket. I pulled the Padlock slightly to check it was secure and the U bend fell out. Poor design. These items need to be graded similar to the padlock CEN system. Unfortunately they are not.
rdodget - 1 / 5 - 17/03/2022
Poor product
Fitted to an external storage box rusted within weeks
gregggggg - 1 / 5 - 02/02/2022
AFFREUX
N'ACHETEZ PAS CELA SI VOUS VOULEZ GARDER VOS AFFAIRES EN SÉCURITÉ ! Tout d'abord, le matériel de tout est si pauvre. Les têtes des vis se détachent lors du vissage. Le corps se plie et se brise d'un seul coup à l'anneau. Bien sûr, le prix est bas, mais l'article est inutile...
MiddleEngland59 - 2 / 5 - 20/07/2020
This is cheap but is it good value?
I installed one of these last week to secure wooden garage doors shut. In retrospect I would have chosen one of the others stocked by B&Q, albeit at a higher price. The screws supplied are very soft, and even with a drilled pilot hole it was hard to get them screwed in without mangling the cross-point screwhead recess. (I see reviews of other models of hasp/staples at B&Q also have this criticism). If they were hard to screw/unscrew when new it would become harder over time for any future alteration, so I substituted better screws. The hasp/staple seem likely to be durable. This design wherein the staple is perpendicular to the direction of the hasp and fits in a close-tolerance cut-out of the hasp, and is perpendicular to whatever it is attached to, means that if you fix the hasp and staple at a distance to mesh correctly when closed, the "hypoteneuse" when trying to open/close it doesn't then allow you to open/close it. I ended up needing to wedge the staple to be tilted towards the hasp pivot in order to allow it to be opened/closed and to fully close.