TCP Smart Downflow Ceramic Wall Mounted Heater 2000W, Ideal For Bathrooms and Small Rooms With Remote

To avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

Means for disconnection having a contact separation in all poles must be incorporated in the fixed wiring in accordance with the wiring rules.

The TCP Downflow Heater must be installed by a competent person or qualified electrician in accordance with the current building and IEE wiring instructions. As the installer or user of this product it is your own responsibility to ensure that this fitting is fit for the purpose for which you have intended it. We cannot accept any liability for loss, damage or premature failure resulting from inappropriate use. This product is intended for normal day service.

This product becomes hot in certain areas can cause burns if touched. Particular attention has to be given where children and vulnerable people are present. Always allow to cool before cleaning, moving or maintenance.

Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool. - Fixed heaters are to be installed so that switches and other controls cannot be touched by a person in the bath or shower.

To prevent a possible fire, do not cover the heater. Keep textiles, curtains or any other flammable material a minimum distance of 1m from the air outlet

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.

This product is intended for indoor use. Do not use the product for any other purpose.

This product is suitable for fixing on a normal non-flammable surface. Not suitable for use on a highly flammable surface.

Do not operate if the product has been dropped or damaged in any way. Please seek help from a professional service facility for electrical or mechanical adjustment, or repair.