Save up to £250 on selected garden furniture, BBQs & spas > Shop now

See more Wood stain


Right chevron


Right chevron

Wood stain

Right chevron
Left chevron
Timbashield Shed & Fence Protector 5 litres (Walnut)
Right chevron

Timbashield Shed & Fence Protector 5 litres (Walnut)

Sold & shipped by A-Chem Limited

Available online only and not stocked in B&Q stores

per L
Checking availability...

Product details

Product information

    Low odour, non flammable and contains only trace levels of VOCs.

    Protection from just one coat.

    A water based wood stain specifically designed for use on exterior wood such as sheds and fences.

    Extends the lifespan of the wood by adding a film that is resistant to fungal growth.

    Note: The finished surface is influenced by several factors including wood species, previous treatments that may have been used, and the condition of the wood, therefore a trial application is always required.

    • Most exterior wood types- rough and smooth
    • Suitable for Wood
    • Weather-resistant
    • Instructions for Use - Surface Preparation Shake / mix well before use and frequently during application (thorough mixing is needed to ensure a consistent colour throughout the treatment). New Bare Timber Ensure the surface is clean, dry and free from contamination. Previously Coated Timber Remove any old loose or peeling coatings and sand back, ensuring any dust is removed. This will reduce the risk of problems such as patchiness or uneven drying. Wear a dust mask during sanding. Surfaces already coated with a wood stain such as Timbashield Wood Protector or Timbashield Shed and Fence Protector should be allowed to naturally weather for a year and do not need the additional sanding step and just need to be thoroughly cleaned before reapplication. Old Timber Wood that has decayed or is damaged should be removed and replaced. Brush with a stiff brush to remove any dirt that has become ingrained. Mould, algae and fungi must be removed and treated with a suitable wood cleaner. Please note that the due to the differences in porosity of some wooden surfaces, rough sawn, absorbent wood will have a darker finish than harder smooth wood. This is due to how much product is absorbed. A test patch is always recommended. Application Apply the product onto dry wood when there is no imminent rain forecast and in temperatures above 5 degrees. Do not apply in damp or humid conditions. Failure to meet these requirements may adversely affect the drying and durability of the finish. Ensure surrounding areas are protected during application. Storage and Shelf The product should be stored in frost- free conditions. Recommended shelf life is 12 months from date of manufacture. If you wish to use the product after this time, stir well and trial before use.
    • Guarantee - 1 year

    Features and benefits

      "Ideal for large areas of rough sawn wood such as fences and sheds, this one coat system nourishes the wood with a blend of natural oils and waxes, depositing UV absorbing pigments to enhance, brighten and leave a long lasting finish.


      • The breathable stain helps to seal the wooden surface to leave a hydrophobic, breathable coating that will not crack, flake, peel or blister.
      • One coat is enough for the coating to regulate moisture, reducing swelling and shrinkage, and leave a highly water resistant coating.
      • Formulated for easy use, the product clings to the brush, reducing dripping on surrounding areas.
      • Water -based alternative to traditional solvent based stains with only trace VOC content-without sacrificing quality.


      Drying time1 day
      Recoat time4-6 hours
      Application methodBrush, roller or spray
      VOC levelTrace
      DurabilityHeavy duty
      Product code5060289630568